Efficiency Enhancement of Photovoltaic Panels via Air, Water, and Porous Media Cooling Methods: Thermal–Electrical Modeling
Sustainability · 18.07.2025 · 17 (14) · 6559
DOI: 10.3390/su17146559 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sustainability, online erschienen am 18.07.2025. Verfasst von Brahim Menacer und 5 weiteren Autor:innen. Die Arbeit wurde bisher 23-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Improving photovoltaic (PV) panel performance under extreme climatic conditions is critical for advancing sustainable energy systems. In hyper-arid regions, elevated operating temperatures significantly reduce panel efficiency. This study investigates and compares three cooling techniques—air cooling, water cooling, and porous media cooling—using thermal and electrical modeling based on CFD simulations in ANSYS. The numerical model replicates a PV system operating under peak solar irradiance (900 W/m2) and realistic ambient conditions in Adrar, Algeria. Simulation results show that air cooling leads to a modest temperature reduction of 6 °C and a marginal efficiency gain of 0.25%. Water cooling, employing a top-down laminar flow, reduces cell temperature by over 35 °C and improves net electrical output by 30.9%, despite pump energy consumption. Porous media cooling, leveraging passive evaporation through gravel, decreases panel temperature by around 30 °C and achieves a net output gain of 26.3%. Mesh sensitivity and validation against experimental data support the accuracy of the model. These findings highlight the significant potential of water and porous material cooling strategies to enhance PV performance in hyper-arid environments. The study also demonstrates that porous media can deliver high thermal effectiveness with minimal energy input, making it a suitable low-cost option for off-grid applications. Future work will integrate long-term climate data, real diffuser geometries, and experimental validation to further refine these models.
Zitieren
APA
Menacer, B., Baghdous, N. E. H., Narayan, S., Al-lehaibi, M., Osorio, L., & Tuninetti, V. (2025). Efficiency Enhancement of Photovoltaic Panels via Air, Water, and Porous Media Cooling Methods: Thermal–Electrical Modeling. Sustainability, 17(14), 6559. https://doi.org/10.3390/su17146559
Vancouver
Menacer B, Baghdous NEH, Narayan S, Al-lehaibi M, Osorio L, Tuninetti V. Efficiency Enhancement of Photovoltaic Panels via Air, Water, and Porous Media Cooling Methods: Thermal–Electrical Modeling. Sustainability. 2025;17(14):6559. doi:10.3390/su17146559
BibTeX
@article{Menacer2025,
author = {Menacer, Brahim and Baghdous, Nour El Houda and Narayan, Sunny and Al-lehaibi, Moaz and Osorio, Liomnis and Tuninetti, Víctor},
title = {Efficiency Enhancement of Photovoltaic Panels via Air, Water, and Porous Media Cooling Methods: Thermal–Electrical Modeling},
journal = {Sustainability},
year = {2025},
volume = {17},
number = {14},
pages = {6559},
doi = {10.3390/su17146559}
}
EUVIMED