Prospective LCA for 3D-Printed Foamed Geopolymer Composites Using Construction Waste as Additives
Sustainability · 15.07.2025 · 17 (14) · 6459
DOI: 10.3390/su17146459 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sustainability, online erschienen am 15.07.2025. Verfasst von Karina Balina und 5 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Latvian Council of Science.
Abstract (Originalsprache)
Additive manufacturing has recently become popular and more cost-effective for building construction. This study presents a prospective life cycle assessment (LCA) of 3D-printed foamed geopolymer composites (3D-FOAM materials) incorporating construction and demolition waste. The materials were developed using fly ash, slag, sand, and a foaming agent, with recycled clay brick waste (CBW) and autoclaved aerated concrete waste (AACW) added as alternative raw materials. The material formulations were evaluated for their compressive strength and thermal conductivity to define two functional units that reflect structural and thermal performance. A prospective life cycle assessment (LCA) was conducted under laboratory-scale conditions using the ReCiPe 2016 method. Results show that adding CBW and AACW reduces environmental impacts across several categories, including global warming potential and ecotoxicity, without compromising material performance. Compared to conventional wall systems, the 3D-FOAM materials offer a viable low-impact alternative when assessed on a functional basis. These findings highlight the potential of integrating recycled materials into additive manufacturing to support circular economy goals in the construction sector.
Förderung
- Latvian Council of Science
Zitieren
APA
Balina, K., Gailitis, R., Sinka, M., Argalis, P. P., Radina, L., & Sprince, A. (2025). Prospective LCA for 3D-Printed Foamed Geopolymer Composites Using Construction Waste as Additives. Sustainability, 17(14), 6459. https://doi.org/10.3390/su17146459
Vancouver
Balina K, Gailitis R, Sinka M, Argalis PP, Radina L, Sprince A. Prospective LCA for 3D-Printed Foamed Geopolymer Composites Using Construction Waste as Additives. Sustainability. 2025;17(14):6459. doi:10.3390/su17146459
BibTeX
@article{Balina2025,
author = {Balina, Karina and Gailitis, Rihards and Sinka, Maris and Argalis, Pauls Pavils and Radina, Liga and Sprince, Andina},
title = {Prospective LCA for 3D-Printed Foamed Geopolymer Composites Using Construction Waste as Additives},
journal = {Sustainability},
year = {2025},
volume = {17},
number = {14},
pages = {6459},
doi = {10.3390/su17146459}
}
EUVIMED