EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Coal Bottom Ash as Supplementary Cementitious Material: Optimizing Reactivity Through Particle Grinding

Adilson Schackow, José da Silva Andrade Neto, Lismari Hack, Marilena Valadares Folgueras, Ana Paula Kirchheim, Erich David Rodríguez Martinez, Paulo Ricardo de Matos

Sustainability · 30.05.2025 · 17 (11) · 5031

DOI: 10.3390/su17115031 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sustainability, online erschienen am 30.05.2025. Verfasst von Adilson Schackow und 6 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Fundação de Amparo à Pesquisa e Inovação do Estado de Santa Catarina (FAPESC).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The shortening tendency of fly ash (FA), together with a reduction in the clinker factor of Portland cement, has driven the search for alternative supplementary cementitious materials (SCMs). Coal bottom ash (CBA) is a byproduct of coal combustion in thermal power plants and has the potential to be used as an SCM. This work assessed the optimization of CBA’s performance as an SCM through particle grinding. Reactivity (R3 test), rheological, and compressive strength tests were conducted, in addition to a thorough characterization of CBA. The results showed that increasing the grinding time progressively increased the reactivity of CBA (R3 heat release), matching the reactivity of FA with 10 min of grinding. Compressive strength tests demonstrated that grinding the CBA for 10 min led to an equivalent performance compared to FA, while increasing the grinding time did not result in additional strength gains. Rheological tests showed that CBA incorporation increased the yield stress and viscosity of pastes (associated with finer and more angular CBA particles); about 40–45% more superplasticizer (SP) was required for CBA-containing pastes to reach a target yield stress compared with FA-containing samples. Overall, properly grinding CBA allowed for obtaining an equivalent reactivity and strength performance to FA, but more SP was required to obtain the same workability.

Förderung

  • Fundação de Amparo à Pesquisa e Inovação do Estado de Santa Catarina (FAPESC)

Zitieren

APA

Schackow, A., Neto, J. D. S. A., Hack, L., Folgueras, M. V., Kirchheim, A. P., Martinez, E. D. R., & Matos, P. R. D. (2025). Coal Bottom Ash as Supplementary Cementitious Material: Optimizing Reactivity Through Particle Grinding. Sustainability, 17(11), 5031. https://doi.org/10.3390/su17115031

Vancouver

Schackow A, Neto JDSA, Hack L, Folgueras MV, Kirchheim AP, Martinez EDR, et al. Coal Bottom Ash as Supplementary Cementitious Material: Optimizing Reactivity Through Particle Grinding. Sustainability. 2025;17(11):5031. doi:10.3390/su17115031

BibTeX
@article{Schackow2025,
  author = {Schackow, Adilson and Neto, José da Silva Andrade and Hack, Lismari and Folgueras, Marilena Valadares and Kirchheim, Ana Paula and Martinez, Erich David Rodríguez and Matos, Paulo Ricardo de},
  title = {Coal Bottom Ash as Supplementary Cementitious Material: Optimizing Reactivity Through Particle Grinding},
  journal = {Sustainability},
  year = {2025},
  volume = {17},
  number = {11},
  pages = {5031},
  doi = {10.3390/su17115031}
}
Kostenlos starten →