EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

One-Step Synthesis of In Situ Sulfur-Doped Porous Carbons for Efficient CO2 Adsorption

Jiang Guo, Yun-Peng Ma, Wen-Jun Wu, Xue-Fang Cao, Yu-Ping Fu

Sustainability · 28.05.2025 · 17 (11) · 4952

DOI: 10.3390/su17114952 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sustainability, online erschienen am 28.05.2025. Verfasst von Jiang Guo und 4 weiteren Autor:innen. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Fundamental Research Program of Shanxi Province, Research Project Supported by Shanxi Scholarship Council of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Porous carbons for CO2 capture were synthesized from a sulfur-rich bituminous coal via a one-step method concurrently including carbonization and KOH activation. The activation parameters were controlled by varying KOH/coal mass ratios (1:1, 2:1, and 3:1) and temperatures (700 °C, 800 °C, and 900 °C) to optimize their CO2 capture performance. The surface physicochemical structural properties of these porous carbons were characterized by applying a Brunauer–Emmett–Teller (BET) surface area analysis, scanning electron microscopy (SEM), X-ray photoelectron spectroscopy, and Raman spectroscopy. The results show that the SBET of sample SCC-800-3 is as high as 2209 m2/g, the CO2 adsorption capacity of sample SCC-700-2 at normal temperature and pressure reaches 3.46 mmol/g, and the CO2/N2 selectivity of sample SCC-700-1 reaches 24. The synergistic effect of moderate activation conditions ensures optimal pore evolution without compromising sulfur species retention. Furthermore, these porous carbons also demonstrate excellent cycling stability and thermal stability. The fitting of the adsorption isotherm model for all samples were further conducted. Adsorption isotherm modeling demonstrated superior fitting accuracy with the dual-parameter Freundlich and tri-parametric Redlich–Peterson formulations across all samples, indicating that the CO2 capture by high-sulfur coal-based porous carbons belongs to multilayer adsorption and the carbon surface is heterogeneous. The CO2 adsorption on porous carbon exhibits spontaneous, exothermic behavior according to the thermodynamic data. These findings confirm the great potential of high-sulfur coal-based porous carbons on the capture of CO2. The presenting research provides a strategy that leverages the synergistic effect of in situ sulfur doping and milder activation conditions, achieving the high-efficiency utilization of high-sulfur coal resources and developing low-cost CO2 capture materials.

Förderung

  • National Natural Science Foundation of China
  • Fundamental Research Program of Shanxi Province
  • Research Project Supported by Shanxi Scholarship Council of China
  • Taiyuan University of Science and Technology Scientific Research Initial Funding
  • Scientific and Technological Achievements Transformation Guidance Project of Shanxi Province

Zitieren

APA

Guo, J., Ma, Y., Wu, W., Cao, X., & Fu, Y. (2025). One-Step Synthesis of In Situ Sulfur-Doped Porous Carbons for Efficient CO2 Adsorption. Sustainability, 17(11), 4952. https://doi.org/10.3390/su17114952

Vancouver

Guo J, Ma Y, Wu W, Cao X, Fu Y. One-Step Synthesis of In Situ Sulfur-Doped Porous Carbons for Efficient CO2 Adsorption. Sustainability. 2025;17(11):4952. doi:10.3390/su17114952

BibTeX
@article{Guo2025,
  author = {Guo, Jiang and Ma, Yun-Peng and Wu, Wen-Jun and Cao, Xue-Fang and Fu, Yu-Ping},
  title = {One-Step Synthesis of In Situ Sulfur-Doped Porous Carbons for Efficient CO2 Adsorption},
  journal = {Sustainability},
  year = {2025},
  volume = {17},
  number = {11},
  pages = {4952},
  doi = {10.3390/su17114952}
}
Kostenlos starten →