EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Plasma Gasification of Medical Plastic Waste to Syngas in a Greenhouse Gas (CO2) Environment

Andrius Tamošiūnas, Mindaugas Milieška, Dovilė Gimžauskaitė, Mindaugas Aikas, Rolandas Uscila, Kęstutis Zakarauskas, Sebastian Fendt, Sebastian Bastek, Hartmut Spliethoff

Sustainability · 27.02.2025 · 17 (5) · 2040

DOI: 10.3390/su17052040 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sustainability, online erschienen am 27.02.2025. Verfasst von Andrius Tamošiūnas und 8 weiteren Autor:innen. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: German Federal Ministry of Education and Research.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The global coronavirus (COVID-19) pandemic in early 2020 caused the amount of medical waste, especially plastic waste, to increase. The pandemic exacerbated the plastic waste management problem, including the need to find more sustainable treatment methods. This study investigated the sustainable conversion of plastic waste (FFP2-type face masks) to syngas via pure CO2 plasma gasification to recover energy and reduce environmental pollution. A direct current (DC) thermal arc plasma torch of 40.6–68.4 kW power generated the plasma stream. Carbon dioxide (CO2), as a greenhouse gas (GHG), was used as the main plasma-forming gas and gasifying agent. The 140thermal feedstock input plasma gasification system was used in the study. The effect of the CO2-to-C ratio on the gasification performance efficiency was investigated. The best CO2 plasma gasification process performance was obtained at a CO2-to-C ratio of 2.34. In these conditions, the main syngas components (H2 + CO) comprised 80.46 vol.% (H2: 24.62 vol.% and CO: 55.84 vol.%) and the following values were seen for the heating value of the syngas (LHVsyngas: 13.88 MJ/Nm3), the syngas yield (3.13 Nm3/kgFFP2), the tar content in the syngas (23.0 g/Nm3), the carbon conversion efficiency (CCE: 70.6%), and the cold gas efficiency (CGE: 47.8%). Additionally, the plasma gasification process mass and energy balance were evaluated. It was demonstrated that CO2 plasma gasification could be a promising thermochemical treatment technology for sustainable plastic waste disposal and the simultaneous utilization of greenhouse gases, such as carbon dioxide.

Förderung

  • German Federal Ministry of Education and Research

Zitieren

APA

Tamošiūnas, A., Milieška, M., Gimžauskaitė, D., Aikas, M., Uscila, R., Zakarauskas, K., Fendt, S., Bastek, S., & Spliethoff, H. (2025). Plasma Gasification of Medical Plastic Waste to Syngas in a Greenhouse Gas (CO2) Environment. Sustainability, 17(5), 2040. https://doi.org/10.3390/su17052040

Vancouver

Tamošiūnas A, Milieška M, Gimžauskaitė D, Aikas M, Uscila R, Zakarauskas K, et al. Plasma Gasification of Medical Plastic Waste to Syngas in a Greenhouse Gas (CO2) Environment. Sustainability. 2025;17(5):2040. doi:10.3390/su17052040

BibTeX
@article{Tamoinas2025,
  author = {Tamošiūnas, Andrius and Milieška, Mindaugas and Gimžauskaitė, Dovilė and Aikas, Mindaugas and Uscila, Rolandas and Zakarauskas, Kęstutis and Fendt, Sebastian and Bastek, Sebastian and Spliethoff, Hartmut},
  title = {Plasma Gasification of Medical Plastic Waste to Syngas in a Greenhouse Gas (CO2) Environment},
  journal = {Sustainability},
  year = {2025},
  volume = {17},
  number = {5},
  pages = {2040},
  doi = {10.3390/su17052040}
}
Kostenlos starten →