EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

From Marble Waste to Eco-Friendly Filament for 3D Printing to Help Renaturalization of Quarries

Daniela Fico, Daniela Rizzo, Valentina De Carolis, Francesca Lerario, Annalisa Di Roma, Carola Esposito Corcione

Sustainability · 25.02.2025 · 17 (5) · 1977

DOI: 10.3390/su17051977 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sustainability, online erschienen am 25.02.2025. Verfasst von Daniela Fico und 5 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministero dell’Istruzione dell’Università e della Ricerca.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The excessive use of materials that are generally difficult to discard, such as stone materials, has caused growing ecological concern. Among these, marble is extracted from quarries, but when the raw material is exhausted, these places are deserted. For this reason, several measures have been adopted in recent years to requalify these areas. In addition, recent technological developments involve the creation of innovative green materials that privilege the circular economy and waste recycling. This research presents the development of innovative, sustainable filaments for the fused filament fabrication (FFF) printing technique from recycled marble waste (MW) and biocompostable and biodegradable polylactic acid (PLA) matrix. MW was added to the polymer in concentrations of 10 wt.%, 20 wt.%, and 30 wt.%, and the blends were extruded to develop innovative green filaments. The chemical/structural properties of the raw materials and the thermal and mechanical features of the new composites were investigated. Composites containing 10 and 20 wt.% of MW showed good printability. In contrast, extrusion and printing difficulties were observed with 30 wt.% of MW. Finally, this paper proposes a project to renaturalize and requalify a disused marble quarry located in Trani (Apulia, Italy) with 3D printing devices using the newly produced eco-filaments, which have better features. The main purpose of this article is to propose a concrete, economic, and sustainable application of 3D printing involving processes such as waste and by-product recycling and renaturalization of disused quarries, with both economic and environmental benefits.

Förderung

  • Ministero dell’Istruzione dell’Università e della Ricerca

Zitieren

APA

Fico, D., Rizzo, D., Carolis, V. D., Lerario, F., Roma, A. D., & Corcione, C. E. (2025). From Marble Waste to Eco-Friendly Filament for 3D Printing to Help Renaturalization of Quarries. Sustainability, 17(5), 1977. https://doi.org/10.3390/su17051977

Vancouver

Fico D, Rizzo D, Carolis VD, Lerario F, Roma AD, Corcione CE. From Marble Waste to Eco-Friendly Filament for 3D Printing to Help Renaturalization of Quarries. Sustainability. 2025;17(5):1977. doi:10.3390/su17051977

BibTeX
@article{Fico2025,
  author = {Fico, Daniela and Rizzo, Daniela and Carolis, Valentina De and Lerario, Francesca and Roma, Annalisa Di and Corcione, Carola Esposito},
  title = {From Marble Waste to Eco-Friendly Filament for 3D Printing to Help Renaturalization of Quarries},
  journal = {Sustainability},
  year = {2025},
  volume = {17},
  number = {5},
  pages = {1977},
  doi = {10.3390/su17051977}
}
Kostenlos starten →