High-Temperature Characteristics of Polyphosphoric Acid-Modified Asphalt and High-Temperature Performance Prediction Analysis of Its Mixtures
Sustainability · 08.06.2024 · 16 (12) · 4922
DOI: 10.3390/su16124922 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sustainability, online erschienen am 08.06.2024. Verfasst von Meiyan Huang und 6 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key Research and Development Program of China, Youth Project of National Natural Science Foundation of China, Guangxi Science and Technology Major Project.
Abstract (Originalsprache)
To promote the application of economical and sustainable polyphosphoric acid (PPA)-modified asphalt in road engineering, styrene-butadiene block copolymer (SBS), styrene-butadiene rubber (SBR), and PPA were used to prepare PPA/SBS and PPA/SBR composite-modified asphalts, which were tested and the data analyzed. Fourier transform infrared spectroscopy (FTIR) tests and thermogravimetric analysis (TG) tests were carried out to study the modification mechanisms of the composite-modified asphalts, and the high-temperature performance of the PPA-modified asphalt and asphalt mixtures was analyzed by dynamic shear rheology (DSR) tests and wheel tracking tests. A gray correlation analysis and a back-propagation (BP) neural network were utilized to construct a prediction model of the high-temperature performance of the asphalt and asphalt mixtures. The test results indicate that PPA chemically interacts with the base asphalt and physically integrates with SBS and SBR. The PPA-modified asphalt has a higher decomposition temperature than the base asphalt, indicating superior thermal stability. As the PPA dosage increases, the G*/sinδ value of the PPA-modified asphalt also increases. In particular, when 0.6% PPA is combined with 2% SBS/SBR, it surpasses the high-temperature performance achieved with 4% SBS/SBR, suggesting that PPA may be a good alternative for polymer modifiers. In addition, the creep recovery of PPA-modified asphalt is influenced by the stress level, and as the stress increases, the R-value decreases, resulting in reduced elastic deformation. Furthermore, the BP neural network model achieved a fit of 0.991 in predicting dynamic stability, with a mean percentage of relative error (MAPE) of 6.15% between measured and predicted values. This underscores the feasibility of using BP neural networks in predictive dynamic stability models.
Förderung
- National Key Research and Development Program of China
- Youth Project of National Natural Science Foundation of China
- Guangxi Science and Technology Major Project
- Open Fund of Key Laboratory of Road Structure and Material of Ministry of Transport (Changsha University of Science & Technology)
Zitieren
APA
Huang, M., Wei, J., Zhou, Y., Li, P., Li, J., Ju, H., & Shi, S. (2024). High-Temperature Characteristics of Polyphosphoric Acid-Modified Asphalt and High-Temperature Performance Prediction Analysis of Its Mixtures. Sustainability, 16(12), 4922. https://doi.org/10.3390/su16124922
Vancouver
Huang M, Wei J, Zhou Y, Li P, Li J, Ju H, et al. High-Temperature Characteristics of Polyphosphoric Acid-Modified Asphalt and High-Temperature Performance Prediction Analysis of Its Mixtures. Sustainability. 2024;16(12):4922. doi:10.3390/su16124922
BibTeX
@article{Huang2024,
author = {Huang, Meiyan and Wei, Jianguo and Zhou, Yuming and Li, Ping and Li, Jinming and Ju, Haolong and Shi, Song},
title = {High-Temperature Characteristics of Polyphosphoric Acid-Modified Asphalt and High-Temperature Performance Prediction Analysis of Its Mixtures},
journal = {Sustainability},
year = {2024},
volume = {16},
number = {12},
pages = {4922},
doi = {10.3390/su16124922}
}
EUVIMED