EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Contribution of Road Vehicle Tyre Wear to Microplastics and Ambient Air Pollution

Barouch Giechaskiel, Theodoros Grigoratos, Marcel Mathissen, Joris Quik, Peter Tromp, Mats Gustafsson, Vicente Franco, Panagiota Dilara

Sustainability · 07.01.2024 · 16 (2) · 522

DOI: 10.3390/su16020522 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sustainability, online erschienen am 07.01.2024. Verfasst von Barouch Giechaskiel und 7 weiteren Autor:innen. Die Arbeit wurde bisher 154-mal zitiert (Crossref) und nennt 258 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Union’s Horizon 2020 research and innovation programme.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Tyre particles are generated by shear forces between the tread and the road or by volatilisation. Tyre abrasion (wear) contributes from one-third to half of microplastics unintentionally released into the environment. The major part ends up in the soil, a considerable amount is released into the aquatic environment, and a small percentage becomes airborne. Nevertheless, tyre abrasion contributes to 5–30% of road transport particulate matter (PM) emissions. This corresponds to approximately 5% of total ambient PM emissions. The particle mass size distribution peak at around 20 to 100 μm, with a second peak in the 2–10 μm range. A nucleation mode has been reported in some studies. The absolute abrasion levels depend on the tyre, vehicle, and road characteristics, but also on environmental conditions and driving style. Most tyre particle emission factors in the literature are based on data prior to the year 2000. We aggregated recent studies and found a mean abrasion of 110 mg/km per vehicle or 68 mg/km/t for passenger cars (based on approximately 300 measurements). Based on a limited number of studies, the PM10 emissions were 1.4–2.2 mg/km per tyre. On the other hand, the particle number emissions were in the order of 1010 #/km per tyre. The ratio of PM10 to total abrasion was found to be 2.5% on average. Finally, the ratio of PM2.5 to PM10 was calculated to be around 40%. Various mitigation measures for tyre particle pollution could be envisaged; the most direct is the limitation of the tyre abrasion rate, as proposed by the European Commission for the Euro 7 regulation. Other regulatory initiatives are also discussed.

Förderung

  • European Union’s Horizon 2020 research and innovation programme

Zitieren

APA

Giechaskiel, B., Grigoratos, T., Mathissen, M., Quik, J., Tromp, P., Gustafsson, M., Franco, V., & Dilara, P. (2024). Contribution of Road Vehicle Tyre Wear to Microplastics and Ambient Air Pollution. Sustainability, 16(2), 522. https://doi.org/10.3390/su16020522

Vancouver

Giechaskiel B, Grigoratos T, Mathissen M, Quik J, Tromp P, Gustafsson M, et al. Contribution of Road Vehicle Tyre Wear to Microplastics and Ambient Air Pollution. Sustainability. 2024;16(2):522. doi:10.3390/su16020522

BibTeX
@article{Giechaskiel2024,
  author = {Giechaskiel, Barouch and Grigoratos, Theodoros and Mathissen, Marcel and Quik, Joris and Tromp, Peter and Gustafsson, Mats and Franco, Vicente and Dilara, Panagiota},
  title = {Contribution of Road Vehicle Tyre Wear to Microplastics and Ambient Air Pollution},
  journal = {Sustainability},
  year = {2024},
  volume = {16},
  number = {2},
  pages = {522},
  doi = {10.3390/su16020522}
}
Kostenlos starten →