EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Free Vibrations of Sustainable Laminated Veneer Lumber Slabs

Małgorzata Abramowicz, Marcin Chybiński, Łukasz Polus, Tomasz Wróblewski

Sustainability · 23.12.2023 · 16 (1) · 166

DOI: 10.3390/su16010166 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sustainability, online erschienen am 23.12.2023. Verfasst von Małgorzata Abramowicz und 3 weiteren Autor:innen. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 65 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Polish Ministry of Science and Higher Education.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this paper, the results of dynamic laboratory tests of four laminated veneer lumber (LVL) slabs of different thicknesses, widths, and types were presented. In three of the tested slabs, LVL with all veneers glued lengthwise was used (LVL R). In one LVL slab, a fifth of the veneers were glued crosswise (LVL X). Laminated veneer lumber slabs are engineering wood products with several important performance characteristics, making them a sustainable and preferred solution in civil engineering. To ensure the safe operation of a building with LVL structural elements, it is important to know their dynamic properties. The basic dynamic characteristics of the slabs obtained from experimental tests made it possible to validate the numerical models of the slabs. The slab models were developed in the Abaqus program using the finite element method. The elastic and shear moduli of laminated veneer lumber used in the four slabs were identified through an optimization process in which the error between the analyzed frequencies from the laboratory tests and the numerical analyses was minimized. In the case of slabs that possess the same thickness and are composed of different LVL types, the elastic modulus of LVL R in the longitudinal direction was 1.16 times higher than the elastic modulus of LVL X in the same direction. However, the elastic moduli of LVL R in tangential and radial directions were lower than the elastic moduli of LVL X in the same directions. The above was the result of the fact that the 45 mm LVL X slab had 3 out of 15 veneers glued crosswise. In the case of slabs possessing different thicknesses but the same width and type, the elastic modulus of the thicker panel was 1.13 times higher than that of the thinner panel. After validating the models, the numerical analyses yielded results consistent with the experimental results. The numerical models of the LVL slabs will be used to develop numerical models of composite floors with LVL panels in future research. Such models will allow for the analysis of floor dynamic characteristics and user-generated vibrations, which is required when verifying the serviceability limit state.

Förderung

  • Polish Ministry of Science and Higher Education

Zitieren

APA

Abramowicz, M., Chybiński, M., Polus, Ł., & Wróblewski, T. (2023). Free Vibrations of Sustainable Laminated Veneer Lumber Slabs. Sustainability, 16(1), 166. https://doi.org/10.3390/su16010166

Vancouver

Abramowicz M, Chybiński M, Polus Ł, Wróblewski T. Free Vibrations of Sustainable Laminated Veneer Lumber Slabs. Sustainability. 2023;16(1):166. doi:10.3390/su16010166

BibTeX
@article{Abramowicz2023,
  author = {Abramowicz, Małgorzata and Chybiński, Marcin and Polus, Łukasz and Wróblewski, Tomasz},
  title = {Free Vibrations of Sustainable Laminated Veneer Lumber Slabs},
  journal = {Sustainability},
  year = {2023},
  volume = {16},
  number = {1},
  pages = {166},
  doi = {10.3390/su16010166}
}
Kostenlos starten →