Life Cycle Assessment of Composites Additive Manufacturing Using Recycled Materials
Sustainability · 24.08.2023 · 15 (17) · 12843
DOI: 10.3390/su151712843 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sustainability, online erschienen am 24.08.2023. Verfasst von Konstantina-Roxani Chatzipanagiotou und 10 weiteren Autor:innen. Die Arbeit wurde bisher 33-mal zitiert (Crossref) und nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Union.
Abstract (Originalsprache)
Additive manufacturing (AM) of composite materials is promising to create customizable products with enhanced properties, utilizing materials like carbon fibers (CFs). To increase their circularity, composite recycling has been proposed to re-introduce the recovered components in AM. A careful evaluation of recycling is necessary, considering the sustainability and functionality (i.e., mechanical properties) of the recovered components. Thus, Life Cycle Assessment (LCA) is applied to estimate the environmental impacts of AM via Fused Filament Fabrication (FFF), using virgin or recycled CFs via solvolysis at a laboratory scale. This study aims to provide a detailed Life Cycle Inventory (LCI) of FFF and evaluate the sustainability of using recycled CFs in AM. For both virgin CF manufacturing and CF recycling, electricity consumption was the main contributor to environmental impacts. CF recovery via solvolysis resulted in lower impacts across most impact categories compared to AM with virgin CFs. Different scenarios were examined to account for the mechanical properties of recycled CFs. AM with 75% recycled CFs, compared to 100% virgin CFs undergoing landfilling, resulted in over 22% reduction in climate change potential, even after a 50% loss of recycled CF functionality. Overall, this study offers insights into the LCI of FFF and shows that CF recycling from composites is worth pursuing.
Förderung
- European Union
Zitieren
APA
Chatzipanagiotou, K., Antypa, D., Petrakli, F., Karatza, A., Pikoń, K., Bogacka, M., Poranek, N., Werle, S., Amanatides, E., Mataras, D., & Koumoulos, E. P. (2023). Life Cycle Assessment of Composites Additive Manufacturing Using Recycled Materials. Sustainability, 15(17), 12843. https://doi.org/10.3390/su151712843
Vancouver
Chatzipanagiotou K, Antypa D, Petrakli F, Karatza A, Pikoń K, Bogacka M, et al. Life Cycle Assessment of Composites Additive Manufacturing Using Recycled Materials. Sustainability. 2023;15(17):12843. doi:10.3390/su151712843
BibTeX
@article{Chatzipanagiotou2023,
author = {Chatzipanagiotou, Konstantina-Roxani and Antypa, Despoina and Petrakli, Foteini and Karatza, Anna and Pikoń, Krzysztof and Bogacka, Magdalena and Poranek, Nikolina and Werle, Sebastian and Amanatides, Eleftherios and Mataras, Dimitrios and Koumoulos, Elias P.},
title = {Life Cycle Assessment of Composites Additive Manufacturing Using Recycled Materials},
journal = {Sustainability},
year = {2023},
volume = {15},
number = {17},
pages = {12843},
doi = {10.3390/su151712843}
}
EUVIMED