EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Adsorption of CO2, CO, H2, and N2 on Zeolites, Activated Carbons, and Metal-Organic Frameworks with Different Surface Nonuniformities

Kang Hun Kim, Moon Hyeon Kim

Sustainability · 26.07.2023 · 15 (15) · 11574

DOI: 10.3390/su151511574 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sustainability, online erschienen am 26.07.2023. Verfasst von Kang Hun Kim und 1 weiteren Autor:innen. Die Arbeit wurde bisher 34-mal zitiert (Crossref) und nennt 73 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Daegu University Academic Research Program.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The single-component adsorption of CO2, CO, N2, and H2 at 25 and 35 °C was studied using microporous faujasite-framework zeolites (NaY and NaX), activated carbons (GCN and MSP), and metal–organic frameworks (A100 and Z1200) as starting points for the separation of CO2 from syngases produced by gasifying biomass-based solid wastes. The indicated adsorption isotherms and uptake of the adsorbates strongly depended on the adsorbates themselves as well as on the adsorbents because of significant differences in the surface features, such as surface nonuniformity, and in the molecular properties. The selectivity of CO2 to the other gases also varied with the adsorbents due to the distinctive energetic characteristics. The surfaces of the zeolites were the most energetically heterogeneous ones, yielding higher CO2 uptake at low pressures, while the two activated carbons and A100 had moderate surface heterogeneities, and MSP showed the highest CO2 uptake at high pressures, such as 6 bar, at which the micropore volume and surface area are important. Z1200, which has highly homogeneous surfaces and no high-affinity-binding sites, exhibited the lowest CO2 adsorption capacity regardless of equilibrated pressure. The surface nonuniformities of the six sorbents were consistent with the calculated isosteric heats of CO2 adsorption. CO2 could be reversibly adsorbed on NaY and MSP but not on GCN, with some metal impurities, although all these adsorbents showed a fully reversible process for CO adsorption. The estimated working capacity for CO2 adsorption at 25 °C was 0.78–6.50 mmol/g, depending on the sorbents used. The highest value was disclosed for MSP, the surface energetic heterogeneity of which was between that of zeolites and Z1200. Such a high working capacity bodes well for use in our later applications.

Förderung

  • Daegu University Academic Research Program

Zitieren

APA

Kim, K. H., & Kim, M. H. (2023). Adsorption of CO2, CO, H2, and N2 on Zeolites, Activated Carbons, and Metal-Organic Frameworks with Different Surface Nonuniformities. Sustainability, 15(15), 11574. https://doi.org/10.3390/su151511574

Vancouver

Kim KH, Kim MH. Adsorption of CO2, CO, H2, and N2 on Zeolites, Activated Carbons, and Metal-Organic Frameworks with Different Surface Nonuniformities. Sustainability. 2023;15(15):11574. doi:10.3390/su151511574

BibTeX
@article{Kim2023,
  author = {Kim, Kang Hun and Kim, Moon Hyeon},
  title = {Adsorption of CO2, CO, H2, and N2 on Zeolites, Activated Carbons, and Metal-Organic Frameworks with Different Surface Nonuniformities},
  journal = {Sustainability},
  year = {2023},
  volume = {15},
  number = {15},
  pages = {11574},
  doi = {10.3390/su151511574}
}
Kostenlos starten →