Dynamic Analysis of a Combined Spiral Bevel Gear and Planetary Gear Set in a Bucket Elevator with High Power Density
Sustainability · 28.02.2023 · 15 (5) · 4304
DOI: 10.3390/su15054304 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sustainability, online erschienen am 28.02.2023. Verfasst von Zhaoxia He und 3 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Shaanxi Natural Science Foundation of China.
Abstract (Originalsprache)
A combined spiral bevel gear and planetary gear set was designed for bucket elevators to reduce the system’s complexity and improve the system’s efficiency. The dynamic model of a combined spiral bevel gear and a 2K-H planetary gear train was developed by using the lumped mass method, where the time-varying mesh stiffness and comprehensive mesh error were introduced. Then, the equations of motion of the system were solved with the Newmark numerical integration method, and the dynamic transmission error and mesh force of the gear pairs were obtained. The influences of different input rotational speeds and power on the dynamic response of the system were analyzed. The dynamic responses of the bearings between the bevel gears, planet carrier, and box were calculated. It was found that the dynamic mesh force gradually decreased with an increase in speed, and it increased with an increase in power. For low-speed and heavy-load transmission systems, the influence of power on the mesh force was more significant. It could also be found that the efficiency of the transmission system composed of a spiral bevel gear and a planetary gear was improved compared with that of the traditional system. Finally, the effectiveness of the dynamic model was validated through a comparison of the test signals. The results of the analysis in this study can be used to guide the design of vibration and noise reduction.
Förderung
- Shaanxi Natural Science Foundation of China
Zitieren
APA
He, Z., Xing, Z., Zhou, Q., & Chang, L. (2023). Dynamic Analysis of a Combined Spiral Bevel Gear and Planetary Gear Set in a Bucket Elevator with High Power Density. Sustainability, 15(5), 4304. https://doi.org/10.3390/su15054304
Vancouver
He Z, Xing Z, Zhou Q, Chang L. Dynamic Analysis of a Combined Spiral Bevel Gear and Planetary Gear Set in a Bucket Elevator with High Power Density. Sustainability. 2023;15(5):4304. doi:10.3390/su15054304
BibTeX
@article{He2023,
author = {He, Zhaoxia and Xing, Zengfei and Zhou, Qing and Chang, Lehao},
title = {Dynamic Analysis of a Combined Spiral Bevel Gear and Planetary Gear Set in a Bucket Elevator with High Power Density},
journal = {Sustainability},
year = {2023},
volume = {15},
number = {5},
pages = {4304},
doi = {10.3390/su15054304}
}
EUVIMED