Research on Deformation and Failure Law of the Gob-Side Roadway in Close Extra-Thick Coal Seams
Sustainability · 02.02.2023 · 15 (3) · 2710
DOI: 10.3390/su15032710 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sustainability, online erschienen am 02.02.2023. Verfasst von Shengquan He und 8 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Postdoctoral Research Foundation of China, Fundamental Research Funds for the Central Universities.
Abstract (Originalsprache)
To reveal the deformation and failure law of the gob-side roadway (GSR) and the main influencing factors in close extra-thick coal seams, the research methods of field monitoring, theoretical analysis, and numerical simulation are adopted in this paper. Field monitoring data shows that microseismic events occur and accumulate frequently in the surrounding rock and some overlying key layers of the GSR. Large deformation is experienced in the middle part of roadway near the solid coal side, the middle and upper parts of the roadway near the coal pillar side, and the roadway floor. The overlying strata of the GSR are fractured to form a composite structure as “low-level cantilever beam and high-level masonry beam”. The coal pillar is squeezed and effected by the composite beam structure and the rotation moment M, causing serious bulge in middle and upper part of the coal pillar side. The stability of the solid coal side of the roadway is affected by the stress transferred from gangue contact point. Numerical simulation shows that the immediate roof and key layer breakage are induced by the mining of the 30,501 working face. Shear and tension failures happen in the GSR due to overburden subsidence and rotary extrusion. The stress and displacement at the middle and upper of the roadway on the coal pillar side are larger than the other area. Compared with the solid coal side, the coal on the coal pillar side is obviously more fractured, with a lower bearing capacity. The peak stress in the coal pillar shows up 2 m away from the roadway, which is close to the length of bolt support. The mining-induced stress and the stress transferred from gangue contact point are the direct reasons for solid coal bulge beside the roadway. The peak stress on the solid coal side is located 7 m away from the roadway, at the gangue contact point where overburden fractures. The overburden strata loads and the transferred stress near the gangue contact point are transferred from the sides to the roadway floor. Their coupling effect with the in situ horizontal stress acts as the force source for the plastic floor heave.
Förderung
- National Natural Science Foundation of China
- Postdoctoral Research Foundation of China
- Fundamental Research Funds for the Central Universities
- State Key Laboratory of Coal Mining and Clean Utilization
Zitieren
APA
He, S., Gao, L., Zhao, B., He, X., Li, Z., Song, D., Chen, T., Ma, Y., & Shen, F. (2023). Research on Deformation and Failure Law of the Gob-Side Roadway in Close Extra-Thick Coal Seams. Sustainability, 15(3), 2710. https://doi.org/10.3390/su15032710
Vancouver
He S, Gao L, Zhao B, He X, Li Z, Song D, et al. Research on Deformation and Failure Law of the Gob-Side Roadway in Close Extra-Thick Coal Seams. Sustainability. 2023;15(3):2710. doi:10.3390/su15032710
BibTeX
@article{He2023,
author = {He, Shengquan and Gao, Le and Zhao, Bin and He, Xueqiu and Li, Zhenlei and Song, Dazhao and Chen, Tuo and Ma, Yanran and Shen, Feng},
title = {Research on Deformation and Failure Law of the Gob-Side Roadway in Close Extra-Thick Coal Seams},
journal = {Sustainability},
year = {2023},
volume = {15},
number = {3},
pages = {2710},
doi = {10.3390/su15032710}
}
EUVIMED