EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The Failure Mechanism of Methane Hydrate-Bearing Specimen Based on Energy Analysis Using Discrete Element Method

Bin Gong, Ruijie Ye, Ruiqi Zhang, Naser Golsanami, Yujing Jiang, Dingrui Guo, Sajjad Negahban

Sustainability · 09.01.2023 · 15 (2) · 1216

DOI: 10.3390/su15021216 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sustainability, online erschienen am 09.01.2023. Verfasst von Bin Gong und 6 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, National Natural Science Foundation of Shandong Province of China, Taishan Scholars Young Expert Program.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Studying the failure mechanism of methane hydrate specimens (MHSs) is of great significance to the exploitation of methane hydrate. Most previous studies have focused on the macro or micromechanical response of MHS under different conditions. However, there are a few studies that have investigated the mechanical response mechanism of MHS based on energy evolution. Therefore, in this study, a numerical model of the methane hydrate-bearing sediments was constructed in the particle flow code (PFC) environment. Then, the numerical model was validated using the conducted laboratory tests; and a series of numerical tests were conducted under different methane hydrate saturation conditions, and the obtained results were analyzed. These results qualitatively describe the main mechanical properties of the methane hydrate-bearing sediments from the viewpoint of energy evolution. The simulation results indicated that during the shear test, the bond breaks at first. Then, the soil particles (sediments) start to roll and rarely slid before shear strength arrives at the highest value. Around the highest shear strength value, more soil particles begin to roll until they occlude with each other. Strain softening is induced by the combined action of the breakage of the hydrate bond and the slipping of soil particles. The higher the hydrate saturation is, the more obvious the strain softening is. Considering that a good agreement was observed between the numerical simulation results and the laboratory test results, it can be concluded that the numerical simulation approach can complement the existing experimental techniques, and also can further clarify the deformation and failure mechanism of various methane hydrate-bearing sediments. The results obtained from the present study will contribute to a better understanding of the mechanical behavior of the gas hydrate-bearing sediments during hydrate dissociation and gas exploitation.

Förderung

  • National Natural Science Foundation of China
  • National Natural Science Foundation of Shandong Province of China
  • Taishan Scholars Young Expert Program

Zitieren

APA

Gong, B., Ye, R., Zhang, R., Golsanami, N., Jiang, Y., Guo, D., & Negahban, S. (2023). The Failure Mechanism of Methane Hydrate-Bearing Specimen Based on Energy Analysis Using Discrete Element Method. Sustainability, 15(2), 1216. https://doi.org/10.3390/su15021216

Vancouver

Gong B, Ye R, Zhang R, Golsanami N, Jiang Y, Guo D, et al. The Failure Mechanism of Methane Hydrate-Bearing Specimen Based on Energy Analysis Using Discrete Element Method. Sustainability. 2023;15(2):1216. doi:10.3390/su15021216

BibTeX
@article{Gong2023,
  author = {Gong, Bin and Ye, Ruijie and Zhang, Ruiqi and Golsanami, Naser and Jiang, Yujing and Guo, Dingrui and Negahban, Sajjad},
  title = {The Failure Mechanism of Methane Hydrate-Bearing Specimen Based on Energy Analysis Using Discrete Element Method},
  journal = {Sustainability},
  year = {2023},
  volume = {15},
  number = {2},
  pages = {1216},
  doi = {10.3390/su15021216}
}
Kostenlos starten →