Quality Improvement of the Forging Process Using Pareto Analysis and 8D Methodology in Automotive Manufacturing: A Case Study
Standards · 17.03.2023 · 3 (1) · 84-94
DOI: 10.3390/standards3010008 ↗Kurz gefasst
Fachartikel in der Zeitschrift Standards, online erschienen am 17.03.2023. Verfasst von Katarína Lestyánszka Škůrková und 3 weiteren Autor:innen. Die Arbeit wurde bisher 25-mal zitiert (Crossref) und nennt 19 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
A systematic approach to nonconformity management and continuous improvements are the key elements of the quality management system. The objective of this paper is to present quality improvement for a manufacturing company producing forgings through the combination of several statistical methods and quality control techniques. First, Pareto analysis was applied, followed by the 8D (eight disciplines) methodology using a structured eight-step approach to problem solving following the PDCA (plan-do-check-act) method. The aim was to identify the problem and discover the critical causes of failures in the management system that allowed the problem to occur, by modifying and combining appropriate quality management methods and tools. The paper introduces a case study considering the forging process in the production of gearboxes, where customer complaints were identified in the last year, demanding the need to eliminate failures. Using the mentioned methods, the root cause of the problem was identified and permanent corrective action was planned and implemented according to the recommendations of the 8D report, which made it possible to reduce the likelihood of a recurrence of this problem and increase customer satisfaction.
Zitieren
APA
Škůrková, K. L., Fidlerová, H., Niciejewska, M., & Idzikowski, A. (2023). Quality Improvement of the Forging Process Using Pareto Analysis and 8D Methodology in Automotive Manufacturing: A Case Study. Standards, 3(1), 84-94. https://doi.org/10.3390/standards3010008
Vancouver
Škůrková KL, Fidlerová H, Niciejewska M, Idzikowski A. Quality Improvement of the Forging Process Using Pareto Analysis and 8D Methodology in Automotive Manufacturing: A Case Study. Standards. 2023;3(1):84-94. doi:10.3390/standards3010008
BibTeX
@article{krkov2023,
author = {Škůrková, Katarína Lestyánszka and Fidlerová, Helena and Niciejewska, Marta and Idzikowski, Adam},
title = {Quality Improvement of the Forging Process Using Pareto Analysis and 8D Methodology in Automotive Manufacturing: A Case Study},
journal = {Standards},
year = {2023},
volume = {3},
number = {1},
pages = {84--94},
doi = {10.3390/standards3010008}
}
EUVIMED