Compression Strength Prediction of Unidirectional Carbon Fiber Composites Using a Mesh-Objective Homogenization Model and Real Fiber Orientation Distribution
Solids · 02.11.2026 · 7 (6) · 56
DOI: 10.3390/solids7060056 ↗Kurz gefasst
Fachartikel in der Zeitschrift Solids, online erschienen am 02.11.2026. Verfasst von Pinelopi Mageira und 5 weiteren Autor:innen. Die Arbeit nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Union.
Abstract (Originalsprache)
This work introduces a methodology for numerical predictions of the compressive strength of unidirectional composites with realistic fiber orientation distributions, which were obtained via structure tensor analysis of 3D X-ray computed tomography scans of specific carbon fiber-reinforced polymer samples. Experimental characterization was performed on the material properties of the constituents, as well as the actual composite. The extracted fiber orientation distribution and the material parameters of the constituents were implemented in a two-dimensional finite element model. The model performs mesh-objective material homogenization for the fibers and matrix constituents, in which the fiber diameter defines the characteristic material length scale. The numerical prediction of the compressive strength was compared with experimental measurements. A kink band-driven failure mechanism was predicted by using the finite element model. The results show that the model can predict the compressive strength potential of the pultruded material, while accounting for the actual distribution of fiber orientation.
Förderung
- European Union
Zitieren
APA
Mageira, P., Poulios, K., Andreasen, J. W., Dahl, V. A., Gundlach, C., & Mikkelsen, L. P. (2026). Compression Strength Prediction of Unidirectional Carbon Fiber Composites Using a Mesh-Objective Homogenization Model and Real Fiber Orientation Distribution. Solids, 7(6), 56. https://doi.org/10.3390/solids7060056
Vancouver
Mageira P, Poulios K, Andreasen JW, Dahl VA, Gundlach C, Mikkelsen LP. Compression Strength Prediction of Unidirectional Carbon Fiber Composites Using a Mesh-Objective Homogenization Model and Real Fiber Orientation Distribution. Solids. 2026;7(6):56. doi:10.3390/solids7060056
BibTeX
@article{Mageira2026,
author = {Mageira, Pinelopi and Poulios, Konstantinos and Andreasen, Jens W. and Dahl, Vedrana A. and Gundlach, Carsten and Mikkelsen, Lars P.},
title = {Compression Strength Prediction of Unidirectional Carbon Fiber Composites Using a Mesh-Objective Homogenization Model and Real Fiber Orientation Distribution},
journal = {Solids},
year = {2026},
volume = {7},
number = {6},
pages = {56},
doi = {10.3390/solids7060056}
}
EUVIMED