EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

High-Temperature Corrosion of Fe-Cr Alloys in Water and HCl Vapor Environments at 500–600 °C

Juan Alberto Alcántara-Cárdenas, Adán Ramírez-López, José Federico Chávez-Alcalá, Manuel Macias-Hernández, Ángel de Jesús Morales Ramírez

Solids · 30.12.2025 · 7 (1) · 3

DOI: 10.3390/solids7010003 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Solids, online erschienen am 30.12.2025. Verfasst von Juan Alberto Alcántara-Cárdenas und 4 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Understanding the corrosion mechanism inside waste incinerators is very important in order to prevent possible damage due to high operational temperatures in chemical reactions for burning raw hazardous materials. Moreover, it is critical to understand the corrosion mechanisms to identify whether the oxides formed are protective or not, enabling us to prevent mass change on the steel walls of heat exchangers in waste incinerators. Thus, the present work comprises a high-temperature corrosion study on four Ferritic alloys with different contents of Al, Si, and Mo which are capable of replacing expensive materials such as stainless steel. The corrosion behavior was evaluated in atmospheres with H2O(g), HCl(g), and an additional mixture of both atmospheres at 500 and 600 °C over 300 h. A thicker but porous heterogeneous oxide scale was formed in the HCl atmosphere, mainly composed of Fe2O3 and Cr2O3. Under the water vapor atmosphere, the presence of (Fe0.6Cr0.4)2O3 was observed. Meanwhile, in the mixed atmosphere, the presence of FeCr2O4, Cr2SiO4, and (CrFe)2O3 was observed. The biggest mass loss was measured inside the water vapor atmosphere. In comparison, inside the mixed atmosphere, the oxide scale was thinner. Finally, it was concluded that the alloy with the best corrosion resistance in HCl and H2O atmospheres was Fe9Cr1.5AlSi3Mo steel.

Zitieren

APA

Alcántara-Cárdenas, J. A., Ramírez-López, A., Chávez-Alcalá, J. F., Macias-Hernández, M., & Ramírez, Á. D. J. M. (2025). High-Temperature Corrosion of Fe-Cr Alloys in Water and HCl Vapor Environments at 500–600 °C. Solids, 7(1), 3. https://doi.org/10.3390/solids7010003

Vancouver

Alcántara-Cárdenas JA, Ramírez-López A, Chávez-Alcalá JF, Macias-Hernández M, Ramírez ÁDJM. High-Temperature Corrosion of Fe-Cr Alloys in Water and HCl Vapor Environments at 500–600 °C. Solids. 2025;7(1):3. doi:10.3390/solids7010003

BibTeX
@article{AlcntaraCrdenas2025,
  author = {Alcántara-Cárdenas, Juan Alberto and Ramírez-López, Adán and Chávez-Alcalá, José Federico and Macias-Hernández, Manuel and Ramírez, Ángel de Jesús Morales},
  title = {High-Temperature Corrosion of Fe-Cr Alloys in Water and HCl Vapor Environments at 500–600 °C},
  journal = {Solids},
  year = {2025},
  volume = {7},
  number = {1},
  pages = {3},
  doi = {10.3390/solids7010003}
}
Kostenlos starten →