EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Assessment of the Additive Fabrication Quality of Sandwich Structures with Novel Triply Periodic Minimal Surface Cores

Alexandru Vasile, Dan Mihai Constantinescu, Iulian Constantin Coropețchi, Ștefan Sorohan, Dragoș Alexandru Apostol

Solids · 11.12.2024 · 5 (4) · 665-680

DOI: 10.3390/solids5040045 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Solids, online erschienen am 11.12.2024. Verfasst von Alexandru Vasile und 4 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Education from Romania.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Triply periodic minimal surface (TPMS) structures raised significant interest in several areas of research due to their unique properties and broad range of applications. The aim of the paper is to verify if such complex metamaterials can be fabricated effectively without defects that could compromise their mechanical response. An implicit modeling approach was used to generate eight novel TPMS structures and one stochastic topology. Multiple specimens were fabricated from a photopolymeric resin using a stereolithography (SLA) technique, and an analysis of the manufactured samples was carried out in terms of surface quality, dimensional and mass deviations, and internal porosity of the material. Laser scanning showed no significant deviations from the designed geometry but highlighted errors during the post-processing stages of manufacturing. Surface analysis resulted in an average roughness of 2.47 µm, a value specific to well-controlled additive manufacturing (AM) techniques. A microscopic examination portrays common types of defects, while an ultrasonic non-destructive inspection method showed no indication of defects in the depth of the samples. Sectioning the samples through water jet cutting exposed interior surfaces with better homogeneity than the exterior ones and the absence of a layer-by-layer aspect. Overall, the samples displayed no major defects and good accuracy, with minor inconsistencies and methods of mitigating them having been presented.

Förderung

  • Ministry of Education from Romania

Zitieren

APA

Vasile, A., Constantinescu, D. M., Coropețchi, I. C., Sorohan, Ș., & Apostol, D. A. (2024). Assessment of the Additive Fabrication Quality of Sandwich Structures with Novel Triply Periodic Minimal Surface Cores. Solids, 5(4), 665-680. https://doi.org/10.3390/solids5040045

Vancouver

Vasile A, Constantinescu DM, Coropețchi IC, Sorohan Ș, Apostol DA. Assessment of the Additive Fabrication Quality of Sandwich Structures with Novel Triply Periodic Minimal Surface Cores. Solids. 2024;5(4):665-680. doi:10.3390/solids5040045

BibTeX
@article{Vasile2024,
  author = {Vasile, Alexandru and Constantinescu, Dan Mihai and Coropețchi, Iulian Constantin and Sorohan, Ștefan and Apostol, Dragoș Alexandru},
  title = {Assessment of the Additive Fabrication Quality of Sandwich Structures with Novel Triply Periodic Minimal Surface Cores},
  journal = {Solids},
  year = {2024},
  volume = {5},
  number = {4},
  pages = {665--680},
  doi = {10.3390/solids5040045}
}
Kostenlos starten →