EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Design and Performance Validation of a Temperature Prediction-Based Active–Passive Heat Storage and Release System for Solar Greenhouses

Aiguang Zhang, Shuo Zhang, Hong Gu, Jingyu Bian, Xufeng Wang, Jianfei Xing, Wentao Li, Guansan Zhu, Jiahui Xu

Solar · 03.08.2026 · 6 (4) · 46

DOI: 10.3390/solar6040046 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Solar, online erschienen am 03.08.2026. Verfasst von Aiguang Zhang und 8 weiteren Autor:innen. Die Arbeit nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Bingtuan Innovative Team Project, Tianshan Talent Program, Bingtuan Science and Technology Innovation Talent Project.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Night-time low temperature remains a major constraint on thermal stability, crop safety and energy-efficient operation in winter solar greenhouses, especially when heat release and auxiliary heating are triggered only after the indoor temperature has approached a low temperature threshold. This study developed a temperature prediction-based active–passive heat storage and release system integrating Internet of Things monitoring, liquid neural network (LNN)-based multi-horizon temperature forecasting, heat storage and release circulation, and decision-making control. The LNN achieved the best forecasting performance among the tested models, with MAE/RMSE values of 0.620/0.775, 0.683/0.854 and 0.758/0.948 °C for 12 h, 24 h and 48 h forecasts, respectively, and was embedded into the system for prediction-assisted operation. A continuous 30-day winter test was conducted in two consecutive stages: heat storage and release without predictive control (HS-NPC, days 1–15) and with prediction-assisted operation (HS-PC, days 16–30). During the consecutive-stage winter test, HS-PC showed higher daily minimum indoor temperature and night-time mean temperature than HS-NPC by 1.92 °C and 4.29 °C, respectively, while reducing daily exposure below 13 °C and 10 °C by 55.0% and 98.2%. Stage-based equivalent input-energy evaluation indicated reductions of 17.1% and 34.3% for HS-NPC and HS-PC relative to the corresponding TG reference periods, respectively. Because HS-NPC and HS-PC were tested in consecutive weather windows rather than in fully synchronized parallel experiments, these improvements should be interpreted as stage-based operational benefits supported by the TG reference and outdoor environmental statistics, rather than as completely weather-independent causal effects. These results indicate that integrating temperature forecasting with heat storage and release regulation can improve low-temperature buffering and energy-saving operation in winter solar greenhouses, while further synchronized or weather-normalized validation is still needed.

Förderung

  • Bingtuan Innovative Team Project
  • Tianshan Talent Program
  • Bingtuan Science and Technology Innovation Talent Project
  • 14th Five-Year National Key R&D Program of China
  • Bingtuan Key-Area Science and Technology Research Project
  • Division-City Science and Technology Research Plan Project
  • University-level Research Project

Zitieren

APA

Zhang, A., Zhang, S., Gu, H., Bian, J., Wang, X., Xing, J., Li, W., Zhu, G., & Xu, J. (2026). Design and Performance Validation of a Temperature Prediction-Based Active–Passive Heat Storage and Release System for Solar Greenhouses. Solar, 6(4), 46. https://doi.org/10.3390/solar6040046

Vancouver

Zhang A, Zhang S, Gu H, Bian J, Wang X, Xing J, et al. Design and Performance Validation of a Temperature Prediction-Based Active–Passive Heat Storage and Release System for Solar Greenhouses. Solar. 2026;6(4):46. doi:10.3390/solar6040046

BibTeX
@article{Zhang2026,
  author = {Zhang, Aiguang and Zhang, Shuo and Gu, Hong and Bian, Jingyu and Wang, Xufeng and Xing, Jianfei and Li, Wentao and Zhu, Guansan and Xu, Jiahui},
  title = {Design and Performance Validation of a Temperature Prediction-Based Active–Passive Heat Storage and Release System for Solar Greenhouses},
  journal = {Solar},
  year = {2026},
  volume = {6},
  number = {4},
  pages = {46},
  doi = {10.3390/solar6040046}
}
Kostenlos starten →