EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Steam Generation for Industry Using Linear Fresnel Solar Collectors and PV-Driven High-Temperature Heat Pumps: Techno-Economic Analysis

Antonio Famiglietti, Ruben Abbas

Solar · 17.06.2025 · 5 (2) · 27

DOI: 10.3390/solar5020027 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Solar, online erschienen am 17.06.2025. Verfasst von Antonio Famiglietti und 1 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: MCIN/AEI/10.13039/501100011033, European Union “NextGenerationEU”/PRTR.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Steam is widely used in industry as a heat carrier for thermal processes and is primarily generated by gas-fired steam boilers. The decarbonization of industrial thermal demand relies on the capability of clean and renewable technologies to provide steam through reliable and cost-effective systems. Concentrating solar thermal technologies are attracting attention as a heat source for industrial steam generation. In addition, electricity-driven high-temperature heat pumps can provide heat using either renewable or grid electricity by upgrading ambient or waste heat to the required temperature level. In this study, linear Fresnel solar collectors and high-temperature heat pumps driven by photovoltaics are considered heat sources for steam generation in industrial processes. Energetic and economic analyses are performed across the European countries to assess and compare their performances. The results demonstrate that for a given available area for the solar field, solar thermal systems provide a higher annual energy yield in southern countries and at lower costs than heat pumps. On the other hand, heat pumps driven by photovoltaics provide higher annual energy for decreasing solar radiation conditions (central and northern Europe), although it leads to higher costs than solar thermal systems. A hybrid scheme combining the two technologies is the favorable option in central Europe, allowing a trade-off between the costs and the energy yield per unit area.

Förderung

  • MCIN/AEI/10.13039/501100011033
  • European Union “NextGenerationEU”/PRTR

Zitieren

APA

Famiglietti, A., & Abbas, R. (2025). Steam Generation for Industry Using Linear Fresnel Solar Collectors and PV-Driven High-Temperature Heat Pumps: Techno-Economic Analysis. Solar, 5(2), 27. https://doi.org/10.3390/solar5020027

Vancouver

Famiglietti A, Abbas R. Steam Generation for Industry Using Linear Fresnel Solar Collectors and PV-Driven High-Temperature Heat Pumps: Techno-Economic Analysis. Solar. 2025;5(2):27. doi:10.3390/solar5020027

BibTeX
@article{Famiglietti2025,
  author = {Famiglietti, Antonio and Abbas, Ruben},
  title = {Steam Generation for Industry Using Linear Fresnel Solar Collectors and PV-Driven High-Temperature Heat Pumps: Techno-Economic Analysis},
  journal = {Solar},
  year = {2025},
  volume = {5},
  number = {2},
  pages = {27},
  doi = {10.3390/solar5020027}
}
Kostenlos starten →