EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Advances on Sb2Se3 Solar Cells Fabricated by Physical Vapor Deposition Techniques

Roberto Jakomin, Stefano Rampino, Giulia Spaggiari, Francesco Pattini

Solar · 12.10.2023 · 3 (4) · 566-595

DOI: 10.3390/solar3040031 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Solar, online erschienen am 12.10.2023. Verfasst von Roberto Jakomin und 3 weiteren Autor:innen. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 117 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Italian Ministry of the Environment and the Energy Security, Italian Ministry of University and Research.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Sb2Se3, as an earth-abundant and low-toxic material, has emerged as one of the most interesting absorbers for clean renewable power generation technologies. Due to its optical properties, especially bandgap and absorption coefficient, the number of papers on Sb2Se3-based solar cells has been constantly increasing in the last ten years, and its power conversion efficiency has raised from 1% in 2014 to 10.57% in 2022. In this review, different Sb2Se3 solar cells’ fabrication technologies based on physical vapor deposition are described and correlated to the texture coefficient (ribbon orientation). Moreover, recent research works of the most promising solar cell configurations with different electron-transporting layers and hole-transporting layers are analyzed with a special emphasis on photovoltaic performances. Furthermore, different Sb2Se3 doping techniques are discussed. All these aspects are considered as new strategies to overcome the Sb2Se3 solar cell’s actual limitations.

Förderung

  • Italian Ministry of the Environment and the Energy Security
  • Italian Ministry of University and Research

Zitieren

APA

Jakomin, R., Rampino, S., Spaggiari, G., & Pattini, F. (2023). Advances on Sb2Se3 Solar Cells Fabricated by Physical Vapor Deposition Techniques. Solar, 3(4), 566-595. https://doi.org/10.3390/solar3040031

Vancouver

Jakomin R, Rampino S, Spaggiari G, Pattini F. Advances on Sb2Se3 Solar Cells Fabricated by Physical Vapor Deposition Techniques. Solar. 2023;3(4):566-595. doi:10.3390/solar3040031

BibTeX
@article{Jakomin2023,
  author = {Jakomin, Roberto and Rampino, Stefano and Spaggiari, Giulia and Pattini, Francesco},
  title = {Advances on Sb2Se3 Solar Cells Fabricated by Physical Vapor Deposition Techniques},
  journal = {Solar},
  year = {2023},
  volume = {3},
  number = {4},
  pages = {566--595},
  doi = {10.3390/solar3040031}
}
Kostenlos starten →