EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Sintering Temperature on Phase Evolution and Oil-Repellent Performance of TiO2–Carbon-Coated Stainless-Steel Mesh

Kayla Laguana, Sonia Egenberger, Jack Tobin, Claudia Wong, Logan Lu, Jack G. Webster, Mingheng Li

Separations · 20.04.2026 · 13 (4) · 125

DOI: 10.3390/separations13040125 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Separations, online erschienen am 20.04.2026. Verfasst von Kayla Laguana und 6 weiteren Autor:innen. Die Arbeit nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: California State University Council on Ocean Affairs, Science & Technology.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates how sintering temperature affects phase evolution, titanium carbide (TiC) formation, and oil-repellent performance in TiO2–carbon-coated 304 stainless-steel mesh for oil–water separation applications. Coated meshes sintered at 400, 500, 600, 700, and 800 °C were evaluated using gravity-driven oil permeation tests with 5W-20 motor oil and oil contact-angle measurements, while coating morphology, composition, and phase evolution were characterized by SEM, EDS, and XRD. Sintering temperature strongly influenced coating structure and wettability. Among the tested conditions, the mesh sintered at 600 °C showed the highest oil contact angle (105°) and the highest initial oil retention efficiency (80%), indicating the most favorable balance between oleophobicity and coating stability within the tested range. XRD analysis showed that 600 °C corresponded to the onset of the anatase-to-rutile transition and the initial formation of TiC. These results suggest that intermediate sintering temperatures can provide a favorable balance between retention of beneficial anatase content and enhanced interfacial interaction within the TiO2–carbon coating. Within the tested conditions, 600 °C was the best-performing sintering condition among the temperatures examined for this coating system.

Förderung

  • California State University Council on Ocean Affairs, Science & Technology

Zitieren

APA

Laguana, K., Egenberger, S., Tobin, J., Wong, C., Lu, L., Webster, J. G., & Li, M. (2026). Effect of Sintering Temperature on Phase Evolution and Oil-Repellent Performance of TiO2–Carbon-Coated Stainless-Steel Mesh. Separations, 13(4), 125. https://doi.org/10.3390/separations13040125

Vancouver

Laguana K, Egenberger S, Tobin J, Wong C, Lu L, Webster JG, et al. Effect of Sintering Temperature on Phase Evolution and Oil-Repellent Performance of TiO2–Carbon-Coated Stainless-Steel Mesh. Separations. 2026;13(4):125. doi:10.3390/separations13040125

BibTeX
@article{Laguana2026,
  author = {Laguana, Kayla and Egenberger, Sonia and Tobin, Jack and Wong, Claudia and Lu, Logan and Webster, Jack G. and Li, Mingheng},
  title = {Effect of Sintering Temperature on Phase Evolution and Oil-Repellent Performance of TiO2–Carbon-Coated Stainless-Steel Mesh},
  journal = {Separations},
  year = {2026},
  volume = {13},
  number = {4},
  pages = {125},
  doi = {10.3390/separations13040125}
}
Kostenlos starten →