EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Deep Purification of Manganese Sulfate Electrolyte by Sodium Dimethyldithiocarbamate Chelation Precipitation: Process and Selective Coordination Mechanism

Tong Liu, Fei Zhu, Xijun Tian, Zhenping Cai, Kai Huang, Song Chen

Separations · 18.04.2026 · 13 (4) · 123

DOI: 10.3390/separations13040123 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Separations, online erschienen am 18.04.2026. Verfasst von Tong Liu und 5 weiteren Autor:innen. Die Arbeit nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Innovation Fund of China GRINM Technology Group.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study addresses the issue of insufficient product purity caused by the co-deposition of three major impurity ions—zinc, nickel, and lead—during the electrodeposition process of high-purity manganese. A targeted deep purification method for manganese sulfate electrolyte was developed using dithiocarbamate chelating agents (sodium dimethyldithiocarbamate, SDD). By optimizing key process parameters such as precipitant concentration, reaction temperature, reaction time, and solution pH, combined with density functional theory (DFT) calculations, to elucidate the selective impurity removal mechanism at the molecular level, a novel process for the efficient synergistic removal of Zn2+, Ni2+, and Pb2+ was established. The results showed that under the conditions of precipitant concentration of 1 g/L, solution pH of 6.5, reaction temperature of 55 °C, and reaction time of 2 h, the residual concentrations of Zn, Ni, and Pb in the electrolyte were all below 0.2 mg/L. DFT calculations revealed that SDD coordinates with metal ions through four sulfur atoms, and the absolute values of binding energies follow the order Ni2+ > Pb2+ > Zn2+ > Mn2+, indicating thermodynamically preferential capture of impurity ions. After purification, the manganese metal obtained by electrodeposition from the manganese sulfate solution achieved a purity exceeding 99.999%, with Zn, Ni, and Pb contents of 0.11 mg/kg, 0.038 mg/kg, and 0.05 mg/kg, respectively, meeting the raw material requirements for semiconductor-grade copper–manganese alloy targets.

Förderung

  • Innovation Fund of China GRINM Technology Group

Zitieren

APA

Liu, T., Zhu, F., Tian, X., Cai, Z., Huang, K., & Chen, S. (2026). Deep Purification of Manganese Sulfate Electrolyte by Sodium Dimethyldithiocarbamate Chelation Precipitation: Process and Selective Coordination Mechanism. Separations, 13(4), 123. https://doi.org/10.3390/separations13040123

Vancouver

Liu T, Zhu F, Tian X, Cai Z, Huang K, Chen S. Deep Purification of Manganese Sulfate Electrolyte by Sodium Dimethyldithiocarbamate Chelation Precipitation: Process and Selective Coordination Mechanism. Separations. 2026;13(4):123. doi:10.3390/separations13040123

BibTeX
@article{Liu2026,
  author = {Liu, Tong and Zhu, Fei and Tian, Xijun and Cai, Zhenping and Huang, Kai and Chen, Song},
  title = {Deep Purification of Manganese Sulfate Electrolyte by Sodium Dimethyldithiocarbamate Chelation Precipitation: Process and Selective Coordination Mechanism},
  journal = {Separations},
  year = {2026},
  volume = {13},
  number = {4},
  pages = {123},
  doi = {10.3390/separations13040123}
}
Kostenlos starten →