Heavy Metal Removal from Water Using Graphene Oxide in Magnetic-Assisted Adsorption Systems: Characterization, Adsorption Properties, and Modelling
Separations · 12.10.2024 · 11 (10) · 294
DOI: 10.3390/separations11100294 ↗Kurz gefasst
Fachartikel in der Zeitschrift Separations, online erschienen am 12.10.2024. Verfasst von A. P. Melchor-Durán und 5 weiteren Autor:innen. Die Arbeit wurde bisher 35-mal zitiert (Crossref) und nennt 72 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Tecnológico Nacional de México.
Abstract (Originalsprache)
This study investigated the adsorption properties of graphene oxide in a magnetic-assisted adsorber for the depollution of water containing heavy metals. Two samples of graphene oxide with different surface chemistry were synthetized and assessed using the magnetic-assisted adsorption systems. One graphene oxide sample exhibited a dual magnetic behavior presenting both diamagnetic and ferromagnetic phases, while the other graphene oxide was diamagnetic. The adsorption properties of these graphene oxide samples for removing Pb2+ and Cu2+ were tested and compared with and without a magnetic field exposure. The results showed that the Pb2+ removal increased using both graphene oxide samples in the magnetic-assisted configuration, while Cu2+ adsorption was less sensitive to the application of the magnetic field. A monolayer model was used to simulate all the heavy metal adsorption isotherms quantified experimentally. It was concluded that the adsorption mechanism designed to remove Pb2+ and Cu2+ using tested graphene oxide samples was mainly multi-ionic where two metallic cations could interact with one active site (i.e., oxygenated functional groups) from the adsorbent surface. The oxygenated surface functionalities of graphene oxide samples played a relevant role in determining the impact of magnetic field exposure on the heavy metal removal efficacy. Magnetic-assisted adsorption using graphene oxide is an interesting alternative to reduce the concentration of Pb2+ in polluted effluents, and it can also be applied to improve the performance of adsorbents with a limited concentration of oxygenated functional groups, which usually show poor removal of challenging water pollutants such as toxic heavy metals.
Förderung
- Tecnológico Nacional de México
Zitieren
APA
Melchor-Durán, A. P., Moreno-Virgen, M. R., Bonilla-Petriciolet, A., Reynel-Ávila, H. E., Ortiz, E. L., & González-Vázquez, O. F. (2024). Heavy Metal Removal from Water Using Graphene Oxide in Magnetic-Assisted Adsorption Systems: Characterization, Adsorption Properties, and Modelling. Separations, 11(10), 294. https://doi.org/10.3390/separations11100294
Vancouver
Melchor-Durán AP, Moreno-Virgen MR, Bonilla-Petriciolet A, Reynel-Ávila HE, Ortiz EL, González-Vázquez OF. Heavy Metal Removal from Water Using Graphene Oxide in Magnetic-Assisted Adsorption Systems: Characterization, Adsorption Properties, and Modelling. Separations. 2024;11(10):294. doi:10.3390/separations11100294
BibTeX
@article{MelchorDurn2024,
author = {Melchor-Durán, A. P. and Moreno-Virgen, M. R. and Bonilla-Petriciolet, A. and Reynel-Ávila, H. E. and Ortiz, E. Lucio and González-Vázquez, O. F.},
title = {Heavy Metal Removal from Water Using Graphene Oxide in Magnetic-Assisted Adsorption Systems: Characterization, Adsorption Properties, and Modelling},
journal = {Separations},
year = {2024},
volume = {11},
number = {10},
pages = {294},
doi = {10.3390/separations11100294}
}
EUVIMED