EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Multiscale Analysis of Permeable and Impermeable Wall Models for Seawater Reverse Osmosis Desalination

Qingqing Yang, Yi Heng, Ying Jiang, Jiu Luo

Separations · 15.02.2023 · 10 (2) · 134

DOI: 10.3390/separations10020134 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Separations, online erschienen am 15.02.2023. Verfasst von Qingqing Yang und 3 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Key-Area Research and Development Program of Guangdong Province, Natural Science Foundation of Guangdong Province, Zhujiang Talent Program of Guangdong Province.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In recent years, high permeability membranes (HPMs) have attracted wide attention in seawater reverse osmosis (SWRO) desalination. However, the limitation of hydrodynamics and mass transfer characteristics for conventional spiral wound modules defeats the advantage of HPMs. Feed spacer design is one of the effective ways to improve module performance by enhancing permeation flux and mitigating membrane fouling. Herein, we propose a multiscale modeling framework that integrates a three-dimensional multi-physics model with a permeable wall and an impermeable wall, respectively, at a sub-millimeter scale and a system-level model at a meter scale. Using the proposed solution framework, a thorough quantitative analysis at different scales is conducted and it indicates that the average errors of the friction coefficient and the Sherwood number using the impermeable wall model are less than 2% and 9%, respectively, for commercial SWRO membrane (water permeability 1 L m−2 h−1 bar−1) and HPMs (3 L m−2 h−1 bar−1, 5 L m−2 h−1 bar−1 and 10 L m−2 h−1 bar−1) systems, compared to the predictions using the permeable wall model. Using both the permeable and impermeable wall models, the system-level simulations, e.g., specific energy consumption, average permeation flux, and the maximum concentration polarization factor at the system inlet are basically the same (error < 2%), while the impermeable wall model has a significant advantage in computational efficiency. The multiscale framework coupling the impermeable wall model can be used to guide the efficient and accurate optimal spacer design and system design for HPMs using, e.g., a machine learning approach.

Förderung

  • Key-Area Research and Development Program of Guangdong Province
  • Natural Science Foundation of Guangdong Province
  • Zhujiang Talent Program of Guangdong Province
  • China Postdoctoral Science Foundation

Zitieren

APA

Yang, Q., Heng, Y., Jiang, Y., & Luo, J. (2023). Multiscale Analysis of Permeable and Impermeable Wall Models for Seawater Reverse Osmosis Desalination. Separations, 10(2), 134. https://doi.org/10.3390/separations10020134

Vancouver

Yang Q, Heng Y, Jiang Y, Luo J. Multiscale Analysis of Permeable and Impermeable Wall Models for Seawater Reverse Osmosis Desalination. Separations. 2023;10(2):134. doi:10.3390/separations10020134

BibTeX
@article{Yang2023,
  author = {Yang, Qingqing and Heng, Yi and Jiang, Ying and Luo, Jiu},
  title = {Multiscale Analysis of Permeable and Impermeable Wall Models for Seawater Reverse Osmosis Desalination},
  journal = {Separations},
  year = {2023},
  volume = {10},
  number = {2},
  pages = {134},
  doi = {10.3390/separations10020134}
}
Kostenlos starten →