EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Multivariate Robustness Modeling of Cannabidiol and Δ9-Tetrahydrocannabinol Quantification Using Two-Level Full Factorial Design

Athip Maha, Thanapat Songsak, Surang Leelawat, Chaowalit Monton

Scientia Pharmaceutica · 20.05.2026 · 94 (2) · 42

DOI: 10.3390/scipharm94020042 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Scientia Pharmaceutica, online erschienen am 20.05.2026. Verfasst von Athip Maha und 3 weiteren Autor:innen. Die Arbeit nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The present study aimed to establish a robustness modeling framework for the determination of cannabidiol (CBD) and Δ9-tetrahydrocannabinol (THC) in cannabis extract using a multivariate approach. A two-level full factorial design was implemented to examine four critical analytical factors, including methanol concentration (80–85% v/v), flow rate (0.8–1.2 mL/min), column temperature (23–27 °C), and detection wavelength (208–212 nm). Seven analytical responses for each compound were assessed, including peak area, retention time, resolution, asymmetry factor, number of theoretical plates, capacity factor, and peak area difference relative to the reference method. Statistical analysis demonstrated that both main effects and interaction effects significantly influenced the measured responses. Design space construction was performed based on predefined acceptance criteria to ensure method robustness: resolution > 1.5, asymmetry < 1.5, number of theoretical plates > 2000, capacity factor > 2, and peak area difference within −5% to 5%. Predictive performance of the developed models was verified by comparing predicted and experimental results. Good agreement was observed under most conditions, whereas deviation was noted for THC quantification at a detection wavelength of 212 nm. Furthermore, CBD and THC contents determined under three selected operating conditions within the established design space were statistically comparable to those obtained using the reference method, except for the condition employing 212 nm detection. The Analytical GREEnness Metric Approach (AGREE) assessment indicated moderate greenness performance of the analytical procedure. Overall, the multivariate two-level full factorial design proved to be an effective tool for robustness modeling of the HPLC method for simultaneous quantification of CBD and THC.

Zitieren

APA

Maha, A., Songsak, T., Leelawat, S., & Monton, C. (2026). Multivariate Robustness Modeling of Cannabidiol and Δ9-Tetrahydrocannabinol Quantification Using Two-Level Full Factorial Design. Scientia Pharmaceutica, 94(2), 42. https://doi.org/10.3390/scipharm94020042

Vancouver

Maha A, Songsak T, Leelawat S, Monton C. Multivariate Robustness Modeling of Cannabidiol and Δ9-Tetrahydrocannabinol Quantification Using Two-Level Full Factorial Design. Scientia Pharmaceutica. 2026;94(2):42. doi:10.3390/scipharm94020042

BibTeX
@article{Maha2026,
  author = {Maha, Athip and Songsak, Thanapat and Leelawat, Surang and Monton, Chaowalit},
  title = {Multivariate Robustness Modeling of Cannabidiol and Δ9-Tetrahydrocannabinol Quantification Using Two-Level Full Factorial Design},
  journal = {Scientia Pharmaceutica},
  year = {2026},
  volume = {94},
  number = {2},
  pages = {42},
  doi = {10.3390/scipharm94020042}
}
Kostenlos starten →