Design and Evaluation of Photocatalytic Reactor Utilizing TiO2/Activated Carbon Catalyst Coated on Mesh for Wastewater Treatment
Sci · 17.06.2026 · 8 (6) · 137
DOI: 10.3390/sci8060137 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sci, online erschienen am 17.06.2026. Verfasst von Adisak Bootwong und 4 weiteren Autor:innen. Die Arbeit nennt 58 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Research and Development Institute, Udon Thani Rajabhat University.
Abstract (Originalsprache)
TiO2/activated carbon (TiO2/AC) was coated on mesh using the dip-coating method employing polyvinyl pyrrolidone (PVP) as a copolymer via a simple mixing method. The obtained catalyst was used to treat real wastewater from a building discharge with a horizontal photoreactor with a continuous flow system. The synthesis of 20%wt TiO2/AC-coated mesh was performed with a fixed TiO2:AC ratio of 1:0.05 wt/wt, as confirmed by employing various characterization techniques, which resulted in a composite TiO2/AC characterized by XRD, FE-SEM, and EDS, confirming the uniform distribution of TiO2/AC nanoparticles coated on mesh substrates. The influence of vital parameters on the best conditions of the photoreactor design, including flow rate (8.0 L/min), light intensity position (5.0 cm), and the number of mesh layers (20 mesh layers), was systematically examined during photocatalytic oxidation. The treatment efficiency of domestic building wastewater was evaluated using a TiO2/AC coated on mesh under visible light irradiation for 120 min. The recirculating batch photoreactor was operated at a continuous flow rate of 8.0 L/min, corresponding to a total treated wastewater volume of 960 L. In real wastewater treatment, the optimized TiO2/AC-coated mesh exhibited the highest activity, achieving approximately 68% BOD removal and 65% COD removal. This study indicates that TiO2/AC-coated mesh can be a good candidate for building wastewater treatment systems using photocatalytic activity under visible light irradiation. However, the TiO2/AC coating exhibited limited reusability, with BOD degradation decreasing to 53% after three cycles. Future work must develop a more stable binder to improve its durability and reusability.
Förderung
- Research and Development Institute, Udon Thani Rajabhat University
Zitieren
APA
Bootwong, A., Khunphonoi, R., Loykaew, A., Sato, S., & Wongaree, M. (2026). Design and Evaluation of Photocatalytic Reactor Utilizing TiO2/Activated Carbon Catalyst Coated on Mesh for Wastewater Treatment. Sci, 8(6), 137. https://doi.org/10.3390/sci8060137
Vancouver
Bootwong A, Khunphonoi R, Loykaew A, Sato S, Wongaree M. Design and Evaluation of Photocatalytic Reactor Utilizing TiO2/Activated Carbon Catalyst Coated on Mesh for Wastewater Treatment. Sci. 2026;8(6):137. doi:10.3390/sci8060137
BibTeX
@article{Bootwong2026,
author = {Bootwong, Adisak and Khunphonoi, Rattabal and Loykaew, Aphirak and Sato, Shin and Wongaree, Mathana},
title = {Design and Evaluation of Photocatalytic Reactor Utilizing TiO2/Activated Carbon Catalyst Coated on Mesh for Wastewater Treatment},
journal = {Sci},
year = {2026},
volume = {8},
number = {6},
pages = {137},
doi = {10.3390/sci8060137}
}
EUVIMED