EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Γ-Cantilever Mechanism-Informed BP Neural Network Compensation for Gap Measurement of an Integrated Knee Distractor in Total Knee Arthroplasty

Enkui Zhang, He Xu, Guanyu Chen, Xuan Liu, Jun Hu, Mingchi Ju, Tailin Han

Sensors · 13.11.2026 · 26 (22) · 7169

DOI: 10.3390/s26227169 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 13.11.2026. Verfasst von Enkui Zhang und 6 weiteren Autor:innen. Die Arbeit nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Jilin Province Science and Technology Development Plan.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In total knee arthroplasty (TKA), intraoperative soft-tissue balance and joint gap accuracy directly affect postoperative joint stability, functional recovery and long-term implant survivorship, but current clinical practice still lacks stable, quantitative measurement tools with sufficient precision. This study developed an integrated knee distractor with integrated force feedback and gap detection; the hardware design reserves two independent actuation channels, whereas all experiments reported in this study were conducted in single-channel mode. A mechanism-informed nonlinear error compensation method was proposed to reduce load-dependent gap-measurement error. First, the load-bearing structure was abstracted as a Γ-shaped cantilever beam model under small-deformation and linear-elastic assumptions, and mechanical analysis was conducted to clarify the formation mechanism of gap measurement error induced by load-induced structural deformation and assembly inaccuracies. Guided by this mechanistic analysis, a dual-input BP neural network was constructed with displacement-sensor output and measured force as inputs and the actual distraction gap as output; the mechanical model informed the selection of these two inputs (mechanism-informed input selection) rather than imposing deformation equations as training constraints. The model was trained and evaluated using 200 averaged calibration samples, constructed from a structured grid of 40 displacement settings (0.5–20 mm at 0.5 mm intervals) crossed with five nominal force levels (20, 40, 60, 80, and 100 N), split at the averaged-sample level into 140 training, 20 validation, and 40 test samples. On the independent test set, the proposed method achieved a root mean square error (RMSE) of 0.1123 mm, a mean absolute error (MAE) of 0.0893 mm, and a maximum absolute error (MaxAE) of 0.3189 mm, with all 40 test samples having absolute errors below the predefined engineering accuracy target of ±0.5 mm under the specified bench-top conditions. This study provides a promising engineering approach for reducing load-dependent gap-measurement error under controlled bench-top conditions; validation on anatomically and biomechanically realistic systems is required before any claim of intraoperative suitability.

Förderung

  • Jilin Province Science and Technology Development Plan

Zitieren

APA

Zhang, E., Xu, H., Chen, G., Liu, X., Hu, J., Ju, M., & Han, T. (2026). Γ-Cantilever Mechanism-Informed BP Neural Network Compensation for Gap Measurement of an Integrated Knee Distractor in Total Knee Arthroplasty. Sensors, 26(22), 7169. https://doi.org/10.3390/s26227169

Vancouver

Zhang E, Xu H, Chen G, Liu X, Hu J, Ju M, et al. Γ-Cantilever Mechanism-Informed BP Neural Network Compensation for Gap Measurement of an Integrated Knee Distractor in Total Knee Arthroplasty. Sensors. 2026;26(22):7169. doi:10.3390/s26227169

BibTeX
@article{Zhang2026,
  author = {Zhang, Enkui and Xu, He and Chen, Guanyu and Liu, Xuan and Hu, Jun and Ju, Mingchi and Han, Tailin},
  title = {Γ-Cantilever Mechanism-Informed BP Neural Network Compensation for Gap Measurement of an Integrated Knee Distractor in Total Knee Arthroplasty},
  journal = {Sensors},
  year = {2026},
  volume = {26},
  number = {22},
  pages = {7169},
  doi = {10.3390/s26227169}
}
Kostenlos starten →