Digital Twin-Enabled Multi-Sensor Framework for Intelligent Fault Diagnosis and Predictive Maintenance of Industrial Machinery
Sensors · 12.11.2026 · 26 (22) · 7161
DOI: 10.3390/s26227161 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, online erschienen am 12.11.2026. Verfasst von Fatima-Ezzahra Labchiri und 7 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This paper presents a multi-sensor framework for condition monitoring and intelligent fault diagnosis in rotating industrial machinery, integrating heterogeneous sensing, machine-learning-based diagnosis, MQTT communication, historical data management, and a synchronized 3D Digital Twin. The experimental platform employs feature-level fusion by combining statistical and spectral descriptors extracted from vibration and acoustic signals with temporally aligned temperature and rotational-speed measurements to classify four machine-health states: Healthy, Minor, Moderate, and Severe. To assess the robustness of the diagnostic approach under different operating conditions, experiments were conducted at seven controlled operating frequencies ranging from 15 to 70 Hz. Sensor signals were segmented and characterized using statistical and spectral features, and seven supervised machine-learning classifiers were comparatively evaluated. The diagnostic contribution of sensor fusion was assessed through an ablation analysis, with classification accuracy increasing from 94.8% using vibration alone to 98.1% when vibration, acoustic, and temperature features were combined. Among the evaluated models, Random Forest achieved the highest overall classification performance, reaching 98.9% accuracy in the comparative evaluation. Under the stricter Leave-One-Operating-Frequency-Out validation, the model achieved a mean accuracy of 98.04 ± 0.48% and a mean Macro-F1 score of 97.94 ± 0.48%, demonstrating stable classification across unseen operating conditions. The architecture separates high-frequency signal acquisition and local processing from supervisory communication, with extracted features, diagnostic states, and selected signal blocks exchanged through MQTT for historical monitoring and Digital Twin synchronization. The MQTT supervisory layer achieved a mean communication latency of 21.8 ms, with no message loss observed during the reported 1000-message test sequence. Experimental results obtained from controlled imbalance and bearing-fault conditions demonstrate the feasibility of the proposed framework for multi-condition fault diagnosis and operator-oriented maintenance support. The developed platform provides an experimental basis for future cross-machine validation, prognostics, remaining-useful-life estimation, and bidirectional Digital Twin capabilities.
Zitieren
APA
Labchiri, F., Bouchra, A., Tabaa, M., Lamane, M., Elmahjoub, A. A. A., Hidila, Z., Fentis, A., & Amana, A. (2026). Digital Twin-Enabled Multi-Sensor Framework for Intelligent Fault Diagnosis and Predictive Maintenance of Industrial Machinery. Sensors, 26(22), 7161. https://doi.org/10.3390/s26227161
Vancouver
Labchiri F, Bouchra A, Tabaa M, Lamane M, Elmahjoub AAA, Hidila Z, et al. Digital Twin-Enabled Multi-Sensor Framework for Intelligent Fault Diagnosis and Predictive Maintenance of Industrial Machinery. Sensors. 2026;26(22):7161. doi:10.3390/s26227161
BibTeX
@article{Labchiri2026,
author = {Labchiri, Fatima-Ezzahra and Bouchra, Adnane and Tabaa, Mohamed and Lamane, Mohamed and Elmahjoub, Abdelhafid Ait Ait and Hidila, Zineb and Fentis, Ayoub and Amana, Abdennaser},
title = {Digital Twin-Enabled Multi-Sensor Framework for Intelligent Fault Diagnosis and Predictive Maintenance of Industrial Machinery},
journal = {Sensors},
year = {2026},
volume = {26},
number = {22},
pages = {7161},
doi = {10.3390/s26227161}
}
EUVIMED