Physics-Based Digital Modeling, Validation, and Failure Scenario Analysis of Multi-Position Interval Control Valves in Intelligent Completion Systems
Sensors · 12.11.2026 · 26 (22) · 7140
DOI: 10.3390/s26227140 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, online erschienen am 12.11.2026. Verfasst von Leonardo Alves da Silva und 8 weiteren Autor:innen. Die Arbeit nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Petrobras.
Abstract (Originalsprache)
Background
Intelligent Completion Systems enable real-time monitoring and remote control of offshore wells through hydraulic actuation of multi-position Interval Control Valves (ICVs). This study develops, calibrates, and quantitatively evaluates a physics-based Digital Model of the Intelligent Completion Hydraulic System and investigates its behavior under simulated degradation conditions.
Methods
Developed in MATLAB/Simulink using Simscape Fluids, the model integrates hydraulic and mechanical subsystems. Calibration involved iterative adjustment of numerical component parameters, guided by equipment specifications and comparisons with field measurements. Simulated pressure responses were subsequently compared with selected offshore operational records. Two degradation mechanisms were investigated: increased equivalent mechanical resistance and external hydraulic leakage.
Results
The model reproduced transient hydraulic pressure responses with Mean Absolute Percentage Error (MAPE) values below 2.5% and Coefficient of Determination (R2) values between 0.98 and 0.99. Increased mechanical resistance restricted actuator displacement, with severe conditions causing incomplete valve positioning and reduced fluid transfer. External leakage progressively reduced circuit pressurization as severity increased.
Conclusions
The calibrated model reproduces the investigated nominal hydraulic behavior and characterizes distinct responses under simulated degradation conditions. These findings provide a foundation for future condition monitoring and fault diagnosis applications, although diagnostic capabilities require independent experimental or field validation. The model also supports future Digital Twin development.
Förderung
- Petrobras
Zitieren
APA
Silva, L. A. D., Sousa, J. S. D., Chaves, L. A. D. O., Delesposte, J. E., Borges, L. F. A., Braga, C. P. L., Tammela, I., Cardoso, R., & Colombo, D. (2026). Physics-Based Digital Modeling, Validation, and Failure Scenario Analysis of Multi-Position Interval Control Valves in Intelligent Completion Systems. Sensors, 26(22), 7140. https://doi.org/10.3390/s26227140
Vancouver
Silva LAD, Sousa JSD, Chaves LADO, Delesposte JE, Borges LFA, Braga CPL, et al. Physics-Based Digital Modeling, Validation, and Failure Scenario Analysis of Multi-Position Interval Control Valves in Intelligent Completion Systems. Sensors. 2026;26(22):7140. doi:10.3390/s26227140
BibTeX
@article{Silva2026,
author = {Silva, Leonardo Alves da and Sousa, Jackson Silverio de and Chaves, Luiz Antônio de Oliveira and Delesposte, Jamile Eleutério and Borges, Luiz Felipe Alves and Braga, Caio Palhares Louseiro and Tammela, Iara and Cardoso, Rodolfo and Colombo, Danilo},
title = {Physics-Based Digital Modeling, Validation, and Failure Scenario Analysis of Multi-Position Interval Control Valves in Intelligent Completion Systems},
journal = {Sensors},
year = {2026},
volume = {26},
number = {22},
pages = {7140},
doi = {10.3390/s26227140}
}
EUVIMED