Machine-Learning Classification of Solids Mass Flow Rate in Gas–Solid Pneumatic Conveying Using Electrostatic Sensor Measurements
Sensors · 09.11.2026 · 26 (21) · 7085
DOI: 10.3390/s26217085 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, online erschienen am 09.11.2026. Verfasst von Özcan Kamışlı und 1 weiteren Autor:innen. Beteiligte Einrichtung: Department of Electrical and Electronics Engineering, Eskişehir Osmangazi University, 26040 Eskişehir, Türkiye. Die Arbeit nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Electrostatic signals in pneumatic conveying depend on solids mass flow rate, air velocity, particle distribution and material, complicating direct estimation. This study classified five nominal solids mass flow rates (0.1–10 g/s) for wheat flour and ground coffee at four air velocities (15–30 m/s) using six ring electrodes and seven arc segments with guarded electrometer-grade front ends. From 1 s blocks, 29 time-, frequency- and time–frequency-domain features per channel were extracted. The Common Vector Approach (CVA), support vector machines (SVMs), multilayer perceptrons (MLPs), random forests (RFs) and feature-based convolutional neural networks (CNNs) were compared with an end-to-end CNN on raw signals. With one feeding cycle per record held out, the best balanced accuracies were 86.9% (flour) and 89.6% (coffee), and 97.8–100% of predictions were within one class. RF regression yielded typical error factors of 1.34 (flour) and 1.31 (coffee). Depending on the classifier, balanced accuracy declined to 47–70% for unseen air velocities and 26–59% across materials; a no-flow control suggested possible contributions from record-specific offsets to the accuracy. These findings restrict the reported performance to the tested conditions and support velocity-range coverage, material-specific calibration and recording-order controls.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Electrical and Electronics Engineering, Eskişehir Osmangazi University, 26040 Eskişehir, Türkiye.
ORCID-Profile: Özcan Kamışlı, Mehmet Bilginer Gülmezoğlu
Zitieren
APA
Kamışlı, Ö., & Gülmezoğlu, M. B. (2026). Machine-Learning Classification of Solids Mass Flow Rate in Gas–Solid Pneumatic Conveying Using Electrostatic Sensor Measurements. Sensors, 26(21), 7085. https://doi.org/10.3390/s26217085
Vancouver
Kamışlı Ö, Gülmezoğlu MB. Machine-Learning Classification of Solids Mass Flow Rate in Gas–Solid Pneumatic Conveying Using Electrostatic Sensor Measurements. Sensors. 2026;26(21):7085. doi:10.3390/s26217085
BibTeX
@article{Kaml2026,
author = {Kamışlı, Özcan and Gülmezoğlu, Mehmet Bilginer},
title = {Machine-Learning Classification of Solids Mass Flow Rate in Gas–Solid Pneumatic Conveying Using Electrostatic Sensor Measurements},
journal = {Sensors},
year = {2026},
volume = {26},
number = {21},
pages = {7085},
doi = {10.3390/s26217085}
}
EUVIMED