EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mg Alloy Matching Layers for Broadband PZT-5H/Epoxy 1-3 Composite Underwater Acoustic Transducers: Acoustic Characterization and Design Simulation

Ziao Xu, Fulin Wang iD, Qi Zhou iD, Zhijian Cai, Feifei Guo, Zengzhe Xi, Jie Dong

Sensors · 04.11.2026 · 26 (21) · 6972

DOI: 10.3390/s26216972 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 04.11.2026. Verfasst von Ziao Xu und 6 weiteren Autor:innen. Beteiligte Einrichtung: National Engineering Research Center of Light Alloy Net Forming, State Key Laboratory of Metal Matrix Composite, School of Materials Science and Engi…. Die Arbeit nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Shanghai Jiao Tong University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The acoustic impedance mismatch between piezoelectric materials and water loads remains a bottleneck that severely hampers the advancement of underwater acoustic transducers. In this work, we propose a novel design that utilizes magnesium (Mg) alloy as the matching layer for PZT-5H/Epoxy 1-3 composite underwater acoustic transducers. To assess the suitability of Mg alloy as a matching-layer material and provide basic data for transducer design, the microstructural dependence of the elastic and acoustic properties is systematically established for solution-treated, extruded, and forged GWZ932 (Mg-9Gd-3Y-2Zn-0.5Zr, wt.%) alloys. It is determined that the elastic coefficients and acoustic performance of the three Mg alloys are essentially independent of grain size, second phases, and texture, whereas the acoustic attenuation coefficient exhibited an increasing trend with grain size at 20 MHz. The three alloys exhibit nearly identical acoustic impedances of 11.01 ± 0.03 MRayl (solution treated), 10.94 ± 0.02 MRayl (extruded), and 11.02 ± 0.03 MRayl (forged). The performance of PZT-5H/Epoxy 1-3 composite transducers with four different matching-layer designs, including single-matching-layer designs (Mg alloy or Al alloy) and dual-matching-layer designs (Mg alloy + polymer or Al alloy + polymer), is simulated using a finite element method (FEM). The results demonstrate that the transducer with the Mg alloy + polymer dual-matching-layer design exhibits both optimal transmitting voltage response (TVR) and receiving voltage sensitivity (RVS) bandwidths, with −6 dB transmit and receive bandwidths of 188.7 kHz and 156.6 kHz, respectively. These simulation results indicate that the Mg alloy + polymer dual-matching-layer design is promising for use in broadband piezoelectric underwater acoustic transducers. This work presents a novel Mg-alloy-based matching-layer scheme, offering a new choice for the matching-layer design of underwater acoustic transducers.

Schlagwörter

Stichwörter der Autor:innen

magnesium alloymatching layerunderwater acoustic transducer

Autor:innen und Institutionen

  • National Engineering Research Center of Light Alloy Net Forming, State Key Laboratory of Metal Matrix Composite, School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240, China.
  • Center of Acoustic Functional Materials and Applications, School of Advanced Manufacturing Engineering, Nanjing University, Suzhou 215163, China.
  • Xi'an Structure-Function Materials International Science and Technology Cooperation Base, School of Materials and Chemical Engineering, Xi'an Technological University, Xi'an 710021, China.

ORCID-Profile: Fulin Wang, Qi Zhou

Förderung

  • Shanghai Jiao Tong University

Zitieren

APA

Xu, Z., Wang, F., Zhou, Q., Cai, Z., Guo, F., Xi, Z., & Dong, J. (2026). Mg Alloy Matching Layers for Broadband PZT-5H/Epoxy 1-3 Composite Underwater Acoustic Transducers: Acoustic Characterization and Design Simulation. Sensors, 26(21), 6972. https://doi.org/10.3390/s26216972

Vancouver

Xu Z, Wang F, Zhou Q, Cai Z, Guo F, Xi Z, et al. Mg Alloy Matching Layers for Broadband PZT-5H/Epoxy 1-3 Composite Underwater Acoustic Transducers: Acoustic Characterization and Design Simulation. Sensors. 2026;26(21):6972. doi:10.3390/s26216972

BibTeX
@article{Xu2026,
  author = {Xu, Ziao and Wang, Fulin and Zhou, Qi and Cai, Zhijian and Guo, Feifei and Xi, Zengzhe and Dong, Jie},
  title = {Mg Alloy Matching Layers for Broadband PZT-5H/Epoxy 1-3 Composite Underwater Acoustic Transducers: Acoustic Characterization and Design Simulation},
  journal = {Sensors},
  year = {2026},
  volume = {26},
  number = {21},
  pages = {6972},
  doi = {10.3390/s26216972}
}
Kostenlos starten →