Non-Learning BIM-Guided Weld Seam Localization from Partial Point Clouds for Robotic Welding of Steel Structures
Sensors · 02.11.2026 · 26 (21) · 6934
DOI: 10.3390/s26216934 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, online erschienen am 02.11.2026. Verfasst von Jiwon Jeong und 1 weiteren Autor:innen. Beteiligte Einrichtung: Department of Civil Engineering, Hongik University, Seoul 04066, Republic of Korea. Die Arbeit nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Korea Agency for Infrastructure Technology Advancement.
Abstract (Originalsprache)
Restricted viewpoints on construction sites often yield partial point clouds in which weld seams are partly or entirely occluded. This study proposes a non-learning BIM-guided method that localizes BIM-defined nominal weld seams by registering a known H-section beam–column joint model to the visible flange and web surfaces. Given an isolated point cloud and the acquisition side, finite analytic member surfaces and a BIM-derived Hesse atlas support multiple admissible initial poses. Each pose is refined using the same multiscale robust point-to-surface objective, and a deterministic terminal criterion selects the pose used to transfer nominal seam paths. Neither seam labels nor reconstruction of occluded geometry is required. On 402 synthetic observations, median seam RMSE, ADD-RMS, and relative rotation error were 1.110 mm, 1.249 mm, and 0.067 degrees, respectively; 89.05% had seam RMSE within 10 mm. On 180 laboratory observations, median point-to-surface distance and 5 mm attachment were 2.137 mm and 82.04%. Median warm processing times on a matched panel were 2.52 s and 3.18 s for synthetic and laboratory inputs, respectively. These findings support the applicability of the proposed method to nominal weld-seam localization under restricted partial-view conditions relevant to construction-site welding.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Civil Engineering, Hongik University, Seoul 04066, Republic of Korea.
- Department of Civil and Environmental Engineering, Hongik University, Seoul 04066, Republic of Korea.
ORCID-Profile: Jiwon Jeong
Förderung
- Korea Agency for Infrastructure Technology Advancement
Zitieren
APA
Jeong, J., & Ahn, S. (2026). Non-Learning BIM-Guided Weld Seam Localization from Partial Point Clouds for Robotic Welding of Steel Structures. Sensors, 26(21), 6934. https://doi.org/10.3390/s26216934
Vancouver
Jeong J, Ahn S. Non-Learning BIM-Guided Weld Seam Localization from Partial Point Clouds for Robotic Welding of Steel Structures. Sensors. 2026;26(21):6934. doi:10.3390/s26216934
BibTeX
@article{Jeong2026,
author = {Jeong, Jiwon and Ahn, Seungjun},
title = {Non-Learning BIM-Guided Weld Seam Localization from Partial Point Clouds for Robotic Welding of Steel Structures},
journal = {Sensors},
year = {2026},
volume = {26},
number = {21},
pages = {6934},
doi = {10.3390/s26216934}
}
EUVIMED