EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Energy-Efficient Hybrid Precoding with Switches and Inverters for Millimeter-Wave MIMO Systems

Sining Li iD, Ke Xu, Huilin Ren, Changwei Huang, Dan Wu, Zhuoqiao Ji, Richu Jin iD, Bochao Su iD, Changning Wei iD, Weiqiang Wu

Sensors · 30.10.2026 · 26 (21) · 6895

DOI: 10.3390/s26216895 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 30.10.2026. Verfasst von Sining Li und 9 weiteren Autor:innen. Beteiligte Einrichtung: Shenzhen Institutes of Advanced Technology, Chinese Academy of Sciences, Shenzhen 518055, China. Die Arbeit nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Shenzhen Polytechnic University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper investigates low-complexity hybrid precoding for a millimeter-wave multi-user massive multiple-input-multiple-output (MIMO) downlink, where a base station simultaneously serves multiple single-antenna users over frequency-flat narrowband channels. The design seeks to improve the trade-off between achievable sum rate, power consumption, and computational cost using a switch-inverter (SI) architecture that replaces high-resolution phase shifters (PSs) with switches and inverters. Digital zero-forcing (ZF) precoding addresses inter-user interference through the effective channel, while a dynamic programming (DP)-based sequential procedure selects SI states for local analog beamforming. The procedure reuses partial complex sums and performs exact amplitude comparisons within a restricted candidate set, without a guarantee of global optimality. Energy efficiency (EE) is evaluated as the bandwidth-normalized achievable sum rate divided by the total consumed power. To improve this metric, the revised DP procedure is combined with antenna deactivation under prescribed analog beamforming-gain constraints. This gain-based design does not directly maximize the multi-user sum rate or EE. For the evaluated 128-antenna SI array, antenna deactivation yields an observed EE improvement of approximately 15% relative to the corresponding all-active DP configuration. Coupling between active and inactive antenna elements is considered, and a corresponding feeding-voltage adjustment is derived to maintain the beam pattern. Applicability to wideband transmission is discussed through a conditional analysis of local analog beamforming gain.

Schlagwörter

Stichwörter der Autor:innen

dynamic programmingenergy efficiencyhybrid precodingmassive MIMOmillimeter-wave MIMOswitches and inverters

Autor:innen und Institutionen

  • Shenzhen Institutes of Advanced Technology, Chinese Academy of Sciences, Shenzhen 518055, China.
  • Tech X Academy, Shenzhen Polytechnic University, Shenzhen 518055, China.
  • School of Electronic and Communication Engineering, Shenzhen Polytechnic University, Shenzhen 518055, China.
  • School of Mechanical and Electrical Engineering, Shenzhen Polytechnic University, Shenzhen 518055, China.

ORCID-Profile: Sining Li, Richu Jin, Bochao Su, Changning Wei

Förderung

  • National Natural Science Foundation of China
  • Shenzhen Polytechnic University

Zitieren

APA

Li, S., Xu, K., Ren, H., Huang, C., Wu, D., Ji, Z., Jin, R., Su, B., Wei, C., & Wu, W. (2026). Energy-Efficient Hybrid Precoding with Switches and Inverters for Millimeter-Wave MIMO Systems. Sensors, 26(21), 6895. https://doi.org/10.3390/s26216895

Vancouver

Li S, Xu K, Ren H, Huang C, Wu D, Ji Z, et al. Energy-Efficient Hybrid Precoding with Switches and Inverters for Millimeter-Wave MIMO Systems. Sensors. 2026;26(21):6895. doi:10.3390/s26216895

BibTeX
@article{Li2026,
  author = {Li, Sining and Xu, Ke and Ren, Huilin and Huang, Changwei and Wu, Dan and Ji, Zhuoqiao and Jin, Richu and Su, Bochao and Wei, Changning and Wu, Weiqiang},
  title = {Energy-Efficient Hybrid Precoding with Switches and Inverters for Millimeter-Wave MIMO Systems},
  journal = {Sensors},
  year = {2026},
  volume = {26},
  number = {21},
  pages = {6895},
  doi = {10.3390/s26216895}
}
Kostenlos starten →