EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

In-Situ Controllable Fabrication and Performance of Laser-Induced Graphene Flexible Sensors for Human Motion Monitoring

Jun Zhang, Ping-An Yang iD, Fang He, Haochuan Wan, Yi Lu

Sensors · 30.10.2026 · 26 (21) · 6886

DOI: 10.3390/s26216886 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 30.10.2026. Verfasst von Jun Zhang und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Robot Engineering, Yangtze Normal University, Chongqing 408100, China. Hauptthemen laut MEDLINE: Graphite, Lasers, Biosensing Techniques. Die Arbeit nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Science Foundation of Chongqing, Science and Technology Research Program of Chongqing Municipal Education Commission, Innovation and Development Joint Fund of Chongqing Natural Science Foundation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Graphene-based resistive sensors exhibit excellent sensing performance, but face challenges in terms of uniformity, stability, and large-scale fabrication. To address these issues, in this study, we blade-coated a PI/PDMS precursor on the fabric surface and constructed graphene via in situ laser induction, thereby effectively improving the preparation efficiency and stability of graphene. Meanwhile, the influence of the PI-to-PDMS ratio on the performance of the laser-induced graphene resistive sensor was investigated. It was found that at a PI-to-PDMS ratio of 1:3, the formed graphene showed the fewest defects and the highest graphene proportion, which originated from its good fluidity, compatibility, and crosslinking density. Experimental results demonstrate that the sensor exhibits favorable sensing performance, with a linearity of 0.99 and a sensitivity of 8.64 within the 10–20% strain range of Sample 2, along with repeatable stability over 2000 cycles, meeting the requirements of skin-friendly contact and highly stable motion monitoring for human joints. This study provides a reference for the efficient and rapid construction of graphene-based resistive sensors and shows considerable application potential.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

GraphiteLasersBiosensing TechniquesHumansMonitoring, PhysiologicMotionMovement

Stichwörter der Autor:innen

flexible strain sensorshuman motion monitoringlaser-induced graphenestabilitystrain range

Substanzen

Graphite

Autor:innen und Institutionen

  • School of Robot Engineering, Yangtze Normal University, Chongqing 408100, China.
  • School of Automation, Chongqing University of Posts and Telecommunications, Chongqing 400065, China.
  • School of Integrated Circuits, Chongqing University of Posts and Telecommunications, Chongqing 400065, China.

ORCID-Profile: Ping-An Yang

Förderung

  • Natural Science Foundation of Chongqing
  • Science and Technology Research Program of Chongqing Municipal Education Commission
  • Innovation and Development Joint Fund of Chongqing Natural Science Foundation
  • China Postdoctoral Science Foundation

Zitieren

APA

Zhang, J., Yang, P. A., He, F., Wan, H., & Lu, Y. (2026). In-Situ Controllable Fabrication and Performance of Laser-Induced Graphene Flexible Sensors for Human Motion Monitoring. Sensors, 26(21), 6886. https://doi.org/10.3390/s26216886

Vancouver

Zhang J, Yang PA, He F, Wan H, Lu Y. In-Situ Controllable Fabrication and Performance of Laser-Induced Graphene Flexible Sensors for Human Motion Monitoring. Sensors. 2026;26(21):6886. doi:10.3390/s26216886

BibTeX
@article{Zhang2026,
  author = {Zhang, Jun and Yang, Ping-An and He, Fang and Wan, Haochuan and Lu, Yi},
  title = {In-Situ Controllable Fabrication and Performance of Laser-Induced Graphene Flexible Sensors for Human Motion Monitoring},
  journal = {Sensors},
  year = {2026},
  volume = {26},
  number = {21},
  pages = {6886},
  doi = {10.3390/s26216886}
}
Kostenlos starten →