EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Hybrid-Level Weighted Multi-View Measurement Method for Industrial Geometric Features

Fangyuan Wang iD, Jibin Zhao

Sensors · 29.10.2026 · 26 (21) · 6834

DOI: 10.3390/s26216834 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 29.10.2026. Verfasst von Fangyuan Wang und 1 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Robotics and Intelligent System, Shenyang Institute of Automation, Chinese Academy of Sciences, Shenyang 110169, China. Die Arbeit nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Liaoning Province, China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Multi-view measurement of industrial geometric features is susceptible to reduced three-dimensional (3D) reconstruction accuracy due to inconsistent imaging quality, local edge localization errors, and unfavorable observation poses. To address these issues, this paper proposes a hybrid-level weighted multi-view measurement method that evaluates the reliability of cross-view observations from two complementary aspects: local edge quality and global observation geometry. At the local level, a subpixel grayscale model is established along the edge-normal direction to derive a local quality weight. At the global level, an observation-geometry weight is defined based on the angle between the feature-plane normal and the camera optical axis. The two weights are then hierarchically normalized and multiplicatively fused for each set of cross-view correspondences. The resulting fused weights are incorporated into multi-view 3D reconstruction, thereby reducing the propagation of errors arising from low-quality local observations and unfavorable viewpoints to the reconstruction. Experiments show that, compared with equal-weight reconstruction, the proposed method reduces the mean error in center-to-center distance measurement by 41.5%, and the mean errors in square-hole width and height measurement by 22.8% and 25.8%, respectively. These results demonstrate the high precision, improved stability, and strong extensibility of the proposed method for industrial planar geometric feature measurement.

Schlagwörter

Stichwörter der Autor:innen

industrial measurementmulti-view geometrysubpixel edge localizationthree-dimensional reconstruction

Autor:innen und Institutionen

  • State Key Laboratory of Robotics and Intelligent System, Shenyang Institute of Automation, Chinese Academy of Sciences, Shenyang 110169, China.
  • University of Chinese Academy of Sciences, Beijing 100049, China.

ORCID-Profile: Fangyuan Wang

Förderung

  • National Natural Science Foundation of China
  • Natural Science Foundation of Liaoning Province, China

Zitieren

APA

Wang, F., & Zhao, J. (2026). A Hybrid-Level Weighted Multi-View Measurement Method for Industrial Geometric Features. Sensors, 26(21), 6834. https://doi.org/10.3390/s26216834

Vancouver

Wang F, Zhao J. A Hybrid-Level Weighted Multi-View Measurement Method for Industrial Geometric Features. Sensors. 2026;26(21):6834. doi:10.3390/s26216834

BibTeX
@article{Wang2026,
  author = {Wang, Fangyuan and Zhao, Jibin},
  title = {A Hybrid-Level Weighted Multi-View Measurement Method for Industrial Geometric Features},
  journal = {Sensors},
  year = {2026},
  volume = {26},
  number = {21},
  pages = {6834},
  doi = {10.3390/s26216834}
}
Kostenlos starten →