EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Investigation of Sensor Component Properties for Application in DC Current Transformer

Jure Konjevod iD, Igor Štambuk, Marko Jurčević iD, Roman Malarić iD

Sensors · 28.10.2026 · 26 (21) · 6813

DOI: 10.3390/s26216813 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 28.10.2026. Verfasst von Jure Konjevod und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Polytechnics, Dr. Franjo Tuđman Defense and Security University, Ilica 256b, 10000 Zagreb, Croatia. Die Arbeit nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Direct-current transformers (DCCTs) rely on small toroidal cores made of soft magnetic materials with high permeability, whose magnetic properties affect the sensitivity and linearity of the sensor. Reliable characterization of such small cores and of the resulting sensor component requires measurements with stated uncertainties, which are rarely reported together. This paper applies and integrates established measurement methods, namely, dynamic hysteresis loop measurements on ring specimens and dc current detection from the asymmetry of the saturation current peaks, into a laboratory test setup for the characterization of DCCT sensor components. Permalloy and nanocrystalline toroidal cores are characterized at 50 Hz. The nanocrystalline cores exhibit a maximum relative permeability of approximately 300 × 103 and a coercivity of approximately 1.1 A/m, compared with approximately 100 × 103 and 4.2–4.9 A/m for the permalloy cores. The sensor component with the tested core is calibrated against a reference current shunt for both current polarities, showing a linearity error of 0.59% FS in the range from −4 A to +4 A. The expanded uncertainty of the reference current measurement is ± 926 µA/A according to the GUM and ±906 µA/A using the Monte Carlo method (k = 2). The results show that the tested nanocrystalline cores are better suited for sensitive dc current detection and provide a basis for core selection and DCCT design.

Schlagwörter

Stichwörter der Autor:innen

B-H curvecage current shuntcurrent sensormodular PXI instrumentationtoroidal core

Autor:innen und Institutionen

  • Department of Polytechnics, Dr. Franjo Tuđman Defense and Security University, Ilica 256b, 10000 Zagreb, Croatia.
  • University of Zagreb Faculty of Electrical Engineering and Computing, Unska 3, 10000 Zagreb, Croatia.

ORCID-Profile: Jure Konjevod, Marko Jurčević, Roman Malarić

Zitieren

APA

Konjevod, J., Štambuk, I., Jurčević, M., & Malarić, R. (2026). Investigation of Sensor Component Properties for Application in DC Current Transformer. Sensors, 26(21), 6813. https://doi.org/10.3390/s26216813

Vancouver

Konjevod J, Štambuk I, Jurčević M, Malarić R. Investigation of Sensor Component Properties for Application in DC Current Transformer. Sensors. 2026;26(21):6813. doi:10.3390/s26216813

BibTeX
@article{Konjevod2026,
  author = {Konjevod, Jure and Štambuk, Igor and Jurčević, Marko and Malarić, Roman},
  title = {Investigation of Sensor Component Properties for Application in DC Current Transformer},
  journal = {Sensors},
  year = {2026},
  volume = {26},
  number = {21},
  pages = {6813},
  doi = {10.3390/s26216813}
}
Kostenlos starten →