EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Cobalt Single-Atom/Nanoparticle Dual Sites on Unzipped Carbon Nanotubes for Electrolyte-Switchable Glucose and Uric Acid Sensing

Alfi Rodiansyah, Changhyun Do iD, Sae Yane Paek, Jong Min Kim, Joonwon Lim iD

Sensors · 26.10.2026 · 26 (21) · 6777

DOI: 10.3390/s26216777 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 26.10.2026. Verfasst von Alfi Rodiansyah und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Information Display, College of Sciences, Kyung Hee University, Seoul 02447, Republic of Korea. Die Arbeit nennt 57 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Kyung Hee University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Non-enzymatic multi-analyte sensing using a single electrode remains challenging owing to the distinct electrochemical environments and catalytic pathways required for different biomarkers. Here, we report an electrolyte-regulated bifunctional electrocatalyst comprising atomically dispersed Co-N/O sites and Co/CoO nanoparticles anchored on nitrogen-doped unzipped carbon nanotubes (SA/NP Co@N-UzCNT) for selective glucose and uric acid (UA) detection. Partial unzipping of the outer CNT walls generates edge-rich graphene nanoribbons while preserving the electrically conductive inner CNT framework, providing abundant N-coordination sites for stabilizing structurally distinct Co motifs. Under alkaline conditions, nanoparticle-derived Co sites are electrochemically converted into catalytically active CoOOH species that promote glucose oxidation, whereas atomically dispersed Co-N sites dominate UA oxidation under neutral conditions, demonstrating electrolyte-dependent catalytic selectivity between the two Co configurations. Switching the electrolyte environment alters the dominant catalytic site, enabling selective detection of glucose and UA using a single-electrode architecture. The resulting sensor achieves sensitivities of 65.18 µA mM−1 cm−2 for glucose in the concentration range of 1–8 mM and 337.5 µA mM−1 cm−2 within the concentration range of 5–500 µM for UA. Practical applicability is demonstrated using a screen-printed electrode strip, which retains approximately 89% of its initial glucose response after 15 days. This work demonstrates that single-atom/nanoparticle coexistence can serve as a functional catalytic architecture for electrolyte-regulated non-enzymatic multi-analyte sensing.

Schlagwörter

Stichwörter der Autor:innen

UA sensingcarbon complexelectrolyte-regulated sensorglucose sensingmulti-analyte detectionsingle atom/nanoparticleunzipped CNT

Autor:innen und Institutionen

  • Department of Information Display, College of Sciences, Kyung Hee University, Seoul 02447, Republic of Korea.
  • Laboratoire de Physique de la Matière Condensée, CNRS, École Polytechnique, Institut Polytechnique de Paris, 91128 Palaiseau, France.
  • Extreme Materials Research Center, Korea Institute of Science and Technology, Seoul 02792, Republic of Korea.
  • KHU-KIST Department of Converging Science and Technology, Kyung Hee University, Seoul 02447, Republic of Korea.

ORCID-Profile: Changhyun Do, Joonwon Lim

Förderung

  • Kyung Hee University

Zitieren

APA

Rodiansyah, A., Do, C., Paek, S. Y., Kim, J. M., & Lim, J. (2026). Cobalt Single-Atom/Nanoparticle Dual Sites on Unzipped Carbon Nanotubes for Electrolyte-Switchable Glucose and Uric Acid Sensing. Sensors, 26(21), 6777. https://doi.org/10.3390/s26216777

Vancouver

Rodiansyah A, Do C, Paek SY, Kim JM, Lim J. Cobalt Single-Atom/Nanoparticle Dual Sites on Unzipped Carbon Nanotubes for Electrolyte-Switchable Glucose and Uric Acid Sensing. Sensors. 2026;26(21):6777. doi:10.3390/s26216777

BibTeX
@article{Rodiansyah2026,
  author = {Rodiansyah, Alfi and Do, Changhyun and Paek, Sae Yane and Kim, Jong Min and Lim, Joonwon},
  title = {Cobalt Single-Atom/Nanoparticle Dual Sites on Unzipped Carbon Nanotubes for Electrolyte-Switchable Glucose and Uric Acid Sensing},
  journal = {Sensors},
  year = {2026},
  volume = {26},
  number = {21},
  pages = {6777},
  doi = {10.3390/s26216777}
}
Kostenlos starten →