EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Regularised Finite-Element Model Updating of a Thin-Walled Cylinder Based on Non-Contact Experimental Modal Analysis

Miaoshuo Li, Yiming Ma, Yupeng Xia iD, Kaibo Lu iD, Chan Xu, Fengshou Gu iD, Qiuxia Fan

Sensors · 25.10.2026 · 26 (21) · 6755

DOI: 10.3390/s26216755 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 25.10.2026. Verfasst von Miaoshuo Li und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Automation and Software Engineering, Shanxi University, Taiyuan 030031, China. Die Arbeit nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, the Science and Technology Cooperation and Exchange Special Pro- 382 gram of Shanxi Province, Fundamental Research Program of Shanxi Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Material removal changes the dynamics of thin-walled parts during machining, making an accurate pre-machining baseline essential for subsequent prediction. This study integrates non-contact testing, scan-based reconstruction and material-property updating into a free-state modelling workflow: laser vibrometry identifies the target frequencies, vision-based measurement extracts the end-face circumferential shapes, and three-dimensional scan data are reconstructed into editable CAD geometry. With geometry and Poisson’s ratio fixed, Young’s modulus E and density ρ are updated using a mean-square relative-frequency-error objective with Tikhonov regularisation, the weight being chosen by a discrete L-curve. Free-state frequencies identify the ratio E/ρ; regularisation selects a representative material-parameter pair under the specified prior and weight, while mode shapes provide morphological checks. In the case study on a thin-walled steel cylinder, the reconstructed model has a median absolute radial deviation of 0.0362 mm (about 1% of the mean wall thickness); the relative RMSE of the three target modes decreases from 1.71% to 1.00%, and that of the non-target modes excluded from the fit decreases from 0.68% to 0.65%, indicating comparable sub-percent aggregate errors with a small decrease for the examined free-state non-target modes. At a fixed weight, runs from two opposite initial directions converge to nearly identical material parameters, showing similar endpoints for the two examined runs under their respective search settings. Geometric, measurement and fitting errors are distinguished. Experimental assessment addresses the free state, complemented by a numerical demonstration under prescribed clamping conditions.

Schlagwörter

Stichwörter der Autor:innen

Tikhonov regularisationfinite-element model updatingparameter degeneracythin-walled cylindervision-based vibration measurement

Autor:innen und Institutionen

  • School of Automation and Software Engineering, Shanxi University, Taiyuan 030031, China.
  • Precision and Vibration Control Innovation Team, Shanxi University, Taiyuan 030031, China.
  • Quantum Precision Measurement and Vibration Control Innovation Center, Taiyuan 030031, China.
  • School of Mechanical Engineering, Taiyuan University of Technology, Taiyuan 030024, China.
  • School of Computing and Engineering, University of Huddersfield, Huddersfield HD1 3DH, UK.

ORCID-Profile: Yupeng Xia, Kaibo Lu, Fengshou Gu

Förderung

  • National Natural Science Foundation of China
  • the Science and Technology Cooperation and Exchange Special Pro- 382 gram of Shanxi Province
  • Fundamental Research Program of Shanxi Province
  • Science and Technology Cooperation and Exchange Special Program of Shanxi Province

Zitieren

APA

Li, M., Ma, Y., Xia, Y., Lu, K., Xu, C., Gu, F., & Fan, Q. (2026). Regularised Finite-Element Model Updating of a Thin-Walled Cylinder Based on Non-Contact Experimental Modal Analysis. Sensors, 26(21), 6755. https://doi.org/10.3390/s26216755

Vancouver

Li M, Ma Y, Xia Y, Lu K, Xu C, Gu F, et al. Regularised Finite-Element Model Updating of a Thin-Walled Cylinder Based on Non-Contact Experimental Modal Analysis. Sensors. 2026;26(21):6755. doi:10.3390/s26216755

BibTeX
@article{Li2026,
  author = {Li, Miaoshuo and Ma, Yiming and Xia, Yupeng and Lu, Kaibo and Xu, Chan and Gu, Fengshou and Fan, Qiuxia},
  title = {Regularised Finite-Element Model Updating of a Thin-Walled Cylinder Based on Non-Contact Experimental Modal Analysis},
  journal = {Sensors},
  year = {2026},
  volume = {26},
  number = {21},
  pages = {6755},
  doi = {10.3390/s26216755}
}
Kostenlos starten →