EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

LiDAR-Based SLAM: A Review of Algorithmic Modules and LiDAR-Inertial Integration Architectures

Eslam Muhammed iD, Ahmed Shaker

Sensors · 28.09.2026 · 26 (19) · 6141

DOI: 10.3390/s26196141 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Sensors, online erschienen am 28.09.2026. Verfasst von Eslam Muhammed und 1 weiteren Autor:innen. Beteiligte Einrichtung: Department of Civil Engineering, Toronto Metropolitan University, 350 Victoria St, Toronto, ON M5B 2K3, Canada. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 195 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Sciences and Engineering Research Council of Canada.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Simultaneous Localization and Mapping (SLAM) enables real-time six-degree-of-freedom (6-DOF) state estimation and spatial reconstruction in environments where global navigation satellite systems (GNSSs) are unavailable or unreliable. Light Detection and Ranging (LiDAR) is particularly suited to this task because it provides direct geometric measurements and remains largely unaffected by ambient illumination. This review presents an architecture-centered synthesis of LiDAR-based SLAM, covering LiDAR-only and LiDAR-inertial systems through a dual-axis, architecture-centered taxonomy. The first axis distinguishes sensing configuration, while the second distinguishes the principal registration, representation, coupling, and estimator structures within the corresponding branches. Core algorithmic modules, including front-end registration, state estimation, loop closure, map representation, and back-end optimization, are examined to determine how their interactions affect accuracy, computational latency, robustness, and scalability. Comparisons of representative systems are integrated within the corresponding methodological sections. Quantitative results are compared only when the same dataset subset, metric, and evaluation protocol are shared, while results obtained under non-equivalent conditions are used only as contextual evidence. The analysis identifies recurring trade-offs between low-latency recursive estimation and globally consistent graph-based optimization, as well as between sparse feature-based, direct, and learning-based representations. It also highlights the field’s progression toward continuous-time estimation, semantic scene understanding, adaptive map representations, neural implicit mapping, and uncertainty-aware sensor fusion. Finally, the review organizes future research around trustworthy estimation and recovery, environmental adaptability, persistent map maintenance, resource-bounded operation, and dependable interfaces with navigation and motion planning.

Schlagwörter

Stichwörter der Autor:innen

3D LiDARLiDAR-inertial odometrySLAMarchitectural taxonomyback-end optimizationloop closuremap representationscan registrationsensor fusionstate estimation

Autor:innen und Institutionen

  • Department of Civil Engineering, Toronto Metropolitan University, 350 Victoria St, Toronto, ON M5B 2K3, Canada.

ORCID-Profile: Eslam Muhammed

Förderung

  • Natural Sciences and Engineering Research Council of Canada

Zitieren

APA

Muhammed, E., & Shaker, A. (2026). LiDAR-Based SLAM: A Review of Algorithmic Modules and LiDAR-Inertial Integration Architectures. Sensors, 26(19), 6141. https://doi.org/10.3390/s26196141

Vancouver

Muhammed E, Shaker A. LiDAR-Based SLAM: A Review of Algorithmic Modules and LiDAR-Inertial Integration Architectures. Sensors. 2026;26(19):6141. doi:10.3390/s26196141

BibTeX
@article{Muhammed2026,
  author = {Muhammed, Eslam and Shaker, Ahmed},
  title = {LiDAR-Based SLAM: A Review of Algorithmic Modules and LiDAR-Inertial Integration Architectures},
  journal = {Sensors},
  year = {2026},
  volume = {26},
  number = {19},
  pages = {6141},
  doi = {10.3390/s26196141}
}
Kostenlos starten →