EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Sustainable Natural-Rubber IoT Smart Insole for Remote Body-Load Monitoring: An Observational Gait Comparison in Flexible Flatfoot

Prachid Saramolee, Praphatson Sengsoon iD, Sarawuth Chaimool iD, Khamphong Khongsomboon, Jakrawat Budboonchu, Siraporn Sakphrom

Sensors · 2026

DOI: 10.3390/s26185687 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, 2026. Verfasst von Prachid Saramolee und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Engineering and Technology, Walailak University, Nakhon Si Thammarat 80160, Thailand. Hauptthemen laut MEDLINE: Flatfoot, Gait, Foot Orthoses, Internet of Things. Die Arbeit nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: This work was supported by Walailak University under the International Research Collaboration Scheme (Contract No. WU-CIA-07909/2525) and the Rubber Authority…, Walailak University, Rubber Authority of Thailand.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Flexible flatfoot (pes planus) alters lower-limb biomechanics and plantar-pressure distribution, raising the risk of pain and injury. Laboratory gait analysis with optical motion capture and force plates is the reference standard but is costly, space-constrained, and ecologically limited. We present the design, fabrication, and validation of a low-cost, sustainable smart insole for Internet-of-Things (IoT) remote body-load monitoring. The device pairs a dual-layer natural-rubber body—a silica-filled sponge–rubber upper for comfort and a carbon-black-reinforced solid outsole for durability—with four load cells per insole at high-pressure plantar landmarks, read through a 24-bit amplifier by an ESP32 that calibrates and streams left/right load over Wi-Fi to the ThingSpeak cloud, with a wrist-worn OLED for real-time feedback. Against reference weights in 25 participants, the system measured total body weight with a mean absolute error of 2.94%, a maximum error of 4.18%, and an RMSE of 1.94 kg (Pearson r = 0.99); the residual was an almost purely systematic proportional bias (slope 0.966, R2 = 0.98) removable by a single in-sample scalar recalibration. In 30 adults (15 normal-arch; 15 flexible flatfoot), spatiotemporal gait parameters were compared while both groups wore the smart insole. Forward-progression parameters, including step length, stride length, and walking velocity, did not differ significantly between groups during comfortable walking (all p > 0.18). The flatfoot group showed a wider mediolateral base—greater stance width during standing (+14%, p = 0.008) and step width during comfortable walking (+23%, p = 0.040, uncorrected). After correction for multiple comparisons, only the reduction in fast-walking cadence remained statistically significant. A sustainably sourced, affordable smart insole can thus deliver clinically meaningful remote body-load monitoring. The findings also point to a dissociation: forward propulsion was comparable between the groups while the insole was worn, whereas the mediolateral base remained wider in flatfoot. Controlled trials pairing orthotic support with active gait retraining are therefore warranted.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

FlatfootGaitFoot OrthosesInternet of ThingsHumansMaleBiomechanical PhenomenaAdultWeight-BearingFemaleMonitoring, Physiologic

Stichwörter der Autor:innen

Internet of Thingsflexible flatfootgait analysisnatural rubber compositeplantar loadremote patient monitoringsmart insolewearable sensors

Autor:innen und Institutionen

  • School of Engineering and Technology, Walailak University, Nakhon Si Thammarat 80160, Thailand.
  • School of Allied Health Sciences, Walailak University, Nakhon Si Thammarat 80160, Thailand.
  • Department of Electrical Engineering, Faculty of Engineering, Khon Kaen University, Khon Kaen 40002, Thailand.
  • Department of Electronic and Telecommunication Engineering, National University of Laos, Vientiane P.O. Box 3166, Laos.
  • Faculty of Engineering, Rajamangala University of Technology Isan Khonkaen Campus, Khon Kaen 40000, Thailand.
  • Center of Excellence in Sustainable Disaster Management, Walailak University, Nakhon Si Thammarat 80160, Thailand.

ORCID-Profile: Praphatson Sengsoon, Sarawuth Chaimool

Förderung

  • This work was supported by Walailak University under the International Research Collaboration Scheme (Contract No. WU-CIA-07909/2525) and the Rubber Authority…
  • Walailak University
  • Rubber Authority of Thailand

Zitieren

APA

Saramolee, P., Sengsoon, P., Chaimool, S., Khongsomboon, K., Budboonchu, J., & Sakphrom, S. (2026). A Sustainable Natural-Rubber IoT Smart Insole for Remote Body-Load Monitoring: An Observational Gait Comparison in Flexible Flatfoot. Sensors. https://doi.org/10.3390/s26185687

Vancouver

Saramolee P, Sengsoon P, Chaimool S, Khongsomboon K, Budboonchu J, Sakphrom S. A Sustainable Natural-Rubber IoT Smart Insole for Remote Body-Load Monitoring: An Observational Gait Comparison in Flexible Flatfoot. Sensors. 2026. doi:10.3390/s26185687

BibTeX
@article{Saramolee2026,
  author = {Saramolee, Prachid and Sengsoon, Praphatson and Chaimool, Sarawuth and Khongsomboon, Khamphong and Budboonchu, Jakrawat and Sakphrom, Siraporn},
  title = {A Sustainable Natural-Rubber IoT Smart Insole for Remote Body-Load Monitoring: An Observational Gait Comparison in Flexible Flatfoot},
  journal = {Sensors},
  year = {2026},
  doi = {10.3390/s26185687}
}
Kostenlos starten →