EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Online Wind Mapping for Coupled Path Planning and Contouring Control of Quadrotors

Mitchell Torok iD, Man Ching Melvin Chan iD, Donglin Sui iD, Mohammad Deghat iD

Sensors · 19.08.2026 · 26 (16) · 5250

DOI: 10.3390/s26165250 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 19.08.2026. Verfasst von Mitchell Torok und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical and Manufacturing Engineering, University of New South Wales, Sydney, NSW 2052, Australia. Die Arbeit nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Quadrotors performing sensing missions near structures such as turbines, towers, and buildings must hold a stable attitude while traversing the structured wind wakes generated by these structures. To maintain trajectory tracking in wind, the vehicle must tilt continuously, and the inner-loop controller must work harder to hold that tilt against the fluctuating flow, raising mean tilt, angular jerk, and command-rate activity. These attitude-domain costs can degrade onboard imagery and gimbal-stabilized sensor data, consuming the actuator authority required to reject further disturbances. Existing work typically treats the two halves of this problem separately: wind is either estimated locally and compensated reactively, or routed around in fields assumed known a priori, and is rarely validated against attitude-domain metrics on hardware. These approaches are most effective when coupled through a single shared representation. A nonlinear disturbance observer estimates wind from the vehicle’s translational dynamics and accumulates it into a spatial map, which simultaneously provides per-stage feedforward compensation to a contouring controller and weights a wind-aware A* planner. On hardware, the estimator matches anemometer ground truth to within 1m/s, and a 2×2 ablation study across three wind configurations shows a reduction of up to 38% in tilt RMS and 28% in its 95th percentile relative to a wind-naive baseline, at the cost of longer paths.

Schlagwörter

Stichwörter der Autor:innen

model predictive contouring controlnonlinear disturbance observeronline wind mappingquadrotorswind-aware path planning

Autor:innen und Institutionen

  • School of Mechanical and Manufacturing Engineering, University of New South Wales, Sydney, NSW 2052, Australia.

ORCID-Profile: Mitchell Torok, Man Ching Melvin Chan, Donglin Sui, Mohammad Deghat

Zitieren

APA

Torok, M., Chan, M. C. M., Sui, D., & Deghat, M. (2026). Online Wind Mapping for Coupled Path Planning and Contouring Control of Quadrotors. Sensors, 26(16), 5250. https://doi.org/10.3390/s26165250

Vancouver

Torok M, Chan MCM, Sui D, Deghat M. Online Wind Mapping for Coupled Path Planning and Contouring Control of Quadrotors. Sensors. 2026;26(16):5250. doi:10.3390/s26165250

BibTeX
@article{Torok2026,
  author = {Torok, Mitchell and Chan, Man Ching Melvin and Sui, Donglin and Deghat, Mohammad},
  title = {Online Wind Mapping for Coupled Path Planning and Contouring Control of Quadrotors},
  journal = {Sensors},
  year = {2026},
  volume = {26},
  number = {16},
  pages = {5250},
  doi = {10.3390/s26165250}
}
Kostenlos starten →