EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Decoupled Fractional-Order Kalman Filter for Accelerometer Tilt Angle Estimation

Naiming Wu, Xu Liu, Houzeng Han, Jian Wang

Sensors · 18.08.2026 · 26 (16) · 5227

DOI: 10.3390/s26165227 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 18.08.2026. Verfasst von Naiming Wu und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Geomatics and Urban Spatial Informatics, Beijing University of Civil Engineering and Architecture, Beijing 102616, China. Die Arbeit nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Zhengzhou PN Foreign Expert Studio Project, Beijing Nova Program.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Accelerometer-based tilt angle estimation is widely used in engineering monitoring, yet random noise and outliers degrade its accuracy. Integer-order Kalman filters suppress noise, but their Markovian model assumes that the current state alone is sufficient to predict the next, neglecting the influence of earlier states on slowly varying processes. Fractional-order Kalman filters incorporate historical states into the prediction. However, the conventional formulation shares a single transition matrix between the state and covariance predictions, underestimating the prediction uncertainty, while the memory mechanism propagates gross errors across iterations. To overcome these limitations, this paper proposes a decoupled fractional-order Kalman filter (DFKF). The method assigns independent transition matrices to the state and covariance predictions, where a scaling coefficient inflates the predicted covariance to lower the prediction weight and strengthen reliance on measurements. A front-end gross-error pre-elimination strategy combining second-order differencing with adaptive peak detection is further introduced to block outlier propagation at the source before it enters the memory mechanism. Simulations under varying noise levels and gross-error conditions show that DFKF achieves a mean RMSE (Root Mean Square Error) of 0.147°, representing reductions of 17.4% and 6.4% over KF (0.178°) and FKF (0.157°), respectively, and a mean MaxAE (Maximum Absolute Error) of 0.548°, outperforming KF and FKF by 24.5% and 10.3%. Under gross-error conditions, DFKF converges in 0.012 s on average, approximately 2.8 times faster than KF and FKF, and the pre-elimination strategy restores accuracy to near-error-free levels.

Schlagwörter

Stichwörter der Autor:innen

Kalman filter (KF)accelerometerdecoupled fractional-order Kalman filter (DFKF)tilt angle estimation

Autor:innen und Institutionen

  • School of Geomatics and Urban Spatial Informatics, Beijing University of Civil Engineering and Architecture, Beijing 102616, China.
  • Beijing Key Laboratory of Precision Reconstruction and Health Monitoring for Architectural Heritage, Beijing 100044, China.

Förderung

  • National Natural Science Foundation of China
  • Zhengzhou PN Foreign Expert Studio Project
  • Beijing Nova Program

Zitieren

APA

Wu, N., Liu, X., Han, H., & Wang, J. (2026). A Decoupled Fractional-Order Kalman Filter for Accelerometer Tilt Angle Estimation. Sensors, 26(16), 5227. https://doi.org/10.3390/s26165227

Vancouver

Wu N, Liu X, Han H, Wang J. A Decoupled Fractional-Order Kalman Filter for Accelerometer Tilt Angle Estimation. Sensors. 2026;26(16):5227. doi:10.3390/s26165227

BibTeX
@article{Wu2026,
  author = {Wu, Naiming and Liu, Xu and Han, Houzeng and Wang, Jian},
  title = {A Decoupled Fractional-Order Kalman Filter for Accelerometer Tilt Angle Estimation},
  journal = {Sensors},
  year = {2026},
  volume = {26},
  number = {16},
  pages = {5227},
  doi = {10.3390/s26165227}
}
Kostenlos starten →