EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Prototype Distributed Six-Port Reflectometer-Based Transmission-Only Vector Network Analyzer

Muhammad Hashir, Colin Gilmore iD, Joe LoVetri iD

Sensors · 18.08.2026 · 26 (16) · 5218

DOI: 10.3390/s26165218 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 18.08.2026. Verfasst von Muhammad Hashir und 2 weiteren Autor:innen. Beteiligte Einrichtung: Electrical and Computer Engineering Department, University of Manitoba, Winnipeg, MB R3T 2N2, Canada. Die Arbeit nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Sciences and Engineering Research Council of Canada, Canada Research Chairs.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A novel distributed Transmission-Only Vector Network Analyzer (TVNA) based on two Six-Port Reflectometers (SPRs) is experimentally verified. The prototype distributed SPR-TVNA measures S21 and operates with two independent RF sources, allowing the two ports of the Device Under Test (DUT) to be widely separated with no common cables coming to a central location. Using the distributed SPR-TVNA allows for measurements of, e.g., distantly separated antennas, or taking grain bin imaging measurements that would otherwise require long coaxial cables. A key issue of these large DUTs is accurate measurement of the through-measurement, S21. The distribution (separation) of the two RF sources in the SPR-VNA requires novel procedures to obtain accurate results. The results are confirmed using simulations and experiments, with the experimental results obtained using custom-built hardware. While, in theory, a full VNA can measure S11 and S22, which is confirmed through simulation, the experimental results show significant errors in S11 and S22. We thus call the current device a Transmission-Only VNA. The fundamental math of the SPR-VNA means there is a ±180° phase uncertainty that must be solved, e.g., via a wide-band sweep looking for phase jumps. The experimental S21 measurements of the prototype show maximum errors of 1.5 dB in magnitude and 6 degrees in phase over a bandwidth of 0.6–1.2 GHz.

Schlagwörter

Stichwörter der Autor:innen

calibrationdistributed transmission-only vectornetwork analyzersix-port reflectometer

Autor:innen und Institutionen

  • Electrical and Computer Engineering Department, University of Manitoba, Winnipeg, MB R3T 2N2, Canada.

ORCID-Profile: Colin Gilmore, Joe LoVetri

Förderung

  • Natural Sciences and Engineering Research Council of Canada
  • Canada Research Chairs

Zitieren

APA

Hashir, M., Gilmore, C., & LoVetri, J. (2026). A Prototype Distributed Six-Port Reflectometer-Based Transmission-Only Vector Network Analyzer. Sensors, 26(16), 5218. https://doi.org/10.3390/s26165218

Vancouver

Hashir M, Gilmore C, LoVetri J. A Prototype Distributed Six-Port Reflectometer-Based Transmission-Only Vector Network Analyzer. Sensors. 2026;26(16):5218. doi:10.3390/s26165218

BibTeX
@article{Hashir2026,
  author = {Hashir, Muhammad and Gilmore, Colin and LoVetri, Joe},
  title = {A Prototype Distributed Six-Port Reflectometer-Based Transmission-Only Vector Network Analyzer},
  journal = {Sensors},
  year = {2026},
  volume = {26},
  number = {16},
  pages = {5218},
  doi = {10.3390/s26165218}
}
Kostenlos starten →