EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Drive-By Time-Varying Feature Extraction for Bridge Damage Detection Using Second-Order Synchrosqueezing Transform

Mingzhe Gao, Xinqun Zhu iD, Jianchun Li iD

Sensors · 15.08.2026 · 26 (16) · 5170

DOI: 10.3390/s26165170 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 15.08.2026. Verfasst von Mingzhe Gao und 2 weiteren Autor:innen. Beteiligte Einrichtung: School of Civil and Environmental Engineering, University of Technology Sydney, Ultimo, NSW 2007, Australia. Die Arbeit nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Australian Research Council.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Recently, drive-by bridge structural health monitoring has gained increasing attention due to its potential to be a cost-effective way to monitor the highway infrastructure. The pre-installed sensory system on a passing vehicle is used to capture the spatiotemporal response of the bridge for structural health monitoring. The vehicle passing over the bridge is a time-varying process, and it is a big challenge to extract the time-varying characteristics of vehicle–bridge interaction systems for structural health monitoring. This paper aims to develop a drive-by time-varying feature extraction approach for bridge structural damage detection using the second-order synchrosqueezing transform. The research first examined the impact of various factors on the frequency changes in VBI systems, including the vehicle mass, stiffness, speed, road surface profiles, measurement noise, and different types of damage. When compared with traditional synchrosqueezing transform, the proposed method provides a clearer and more accurate time–frequency representation. A 6 m-long two-span bridge model is also built in the laboratory and the pre-installed wireless sensory system on a passing vehicle captures the vehicle and bridge interaction response. The time-varying features are extracted from dynamic responses of the vehicle passing over the bridge using the proposed method. Numerical and experimental results show that the proposed approach is effective and accurate enough to extract the time-varying features for bridge damage detection.

Schlagwörter

Stichwörter der Autor:innen

bridge structural health monitoringinstantaneous frequencysecond-order synchrosqueezing transformtime–frequency characteristicstime–frequency representationvehicle–bridge interaction

Autor:innen und Institutionen

  • School of Civil and Environmental Engineering, University of Technology Sydney, Ultimo, NSW 2007, Australia.

ORCID-Profile: Xinqun Zhu, Jianchun Li

Förderung

  • Australian Research Council

Zitieren

APA

Gao, M., Zhu, X., & Li, J. (2026). Drive-By Time-Varying Feature Extraction for Bridge Damage Detection Using Second-Order Synchrosqueezing Transform. Sensors, 26(16), 5170. https://doi.org/10.3390/s26165170

Vancouver

Gao M, Zhu X, Li J. Drive-By Time-Varying Feature Extraction for Bridge Damage Detection Using Second-Order Synchrosqueezing Transform. Sensors. 2026;26(16):5170. doi:10.3390/s26165170

BibTeX
@article{Gao2026,
  author = {Gao, Mingzhe and Zhu, Xinqun and Li, Jianchun},
  title = {Drive-By Time-Varying Feature Extraction for Bridge Damage Detection Using Second-Order Synchrosqueezing Transform},
  journal = {Sensors},
  year = {2026},
  volume = {26},
  number = {16},
  pages = {5170},
  doi = {10.3390/s26165170}
}
Kostenlos starten →