EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Zynq-Based Triaxial Vibration Sensing Station with GPS-Disciplined Timing

Xiyuan Zhang, Yongqing Wang, Qisheng Zhang, Mingwei Qi, Jinhang Zhang, Jingwen Zhang, Xiaochang Liu

Sensors · 11.08.2026 · 26 (16) · 5089

DOI: 10.3390/s26165089 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 11.08.2026. Verfasst von Xiyuan Zhang und 6 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory of Intraplate Volcanoes and Earthquakes, School of Geophysics and Information Technology, China University of Geosciences, Beijing 100…. Die Arbeit nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Deep Earth Probe and Mineral Resources Exploration National Science and Technology Major Project.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Deep drilling equipment operates under high-load, strong-vibration, intermittent-impact, and variable environmental conditions, which motivate sensing systems that provide low-noise acquisition, synchronized triaxial measurements, local data integrity, and quantitative measurement-chain characterization. This paper presents a Zynq UltraScale+ MPSoC-based triaxial vibration sensing station for deep drilling equipment applications. The modular station integrates conditioned-voltage triaxial accelerometer interfaces, analog signal conditioning, 24-bit simultaneous analog-to-digital conversion, electrical isolation, local solid-state-drive storage, Ethernet/wireless communication, and GPS-disciplined oven-controlled crystal oscillator (OCXO) timing. The programmable logic performs deterministic acquisition, GPS pulse processing, oscillator calibration, and DMA transfer, while the processing system facilitates storage, network communication, device-state management, and host computer interaction. The sensing electronics are evaluated through zero-input noise, an experiment-specific input-amplitude-to-noise ratio, gain linearity, thermal stability, repeatability, and station-to-station local-PPS timing tests. The characterized electronics achieve a mean equivalent input noise of 0.31 microvolts, a test-derived ratio of 135.08 dB, and a mean station-to-station local-PPS falling-edge difference of 0.34 microseconds. A lightweight post-acquisition interpretation workflow using learnable multichannel weighted fusion, a convolutional autoencoder, a training-distribution-based quantile threshold, and an auxiliary classification branch achieves 0.9705 accuracy and 0.9704 F1-score on a public triaxial bearing dataset under the reported protocol. A crane-based experiment evaluates deployment feasibility and the sensing–analysis workflow using controlled operating events and a removable stationary mass disturbance. The results provide an engineering sensing basis for distributed monitoring studies on deep drilling equipment.

Schlagwörter

Stichwörter der Autor:innen

GPS-disciplined OCXOZynq MPSoCcondition monitoringdeep drilling equipmentembedded sensingtime synchronizationtriaxial acquisitionvibration sensor system

Autor:innen und Institutionen

  • Key Laboratory of Intraplate Volcanoes and Earthquakes, School of Geophysics and Information Technology, China University of Geosciences, Beijing 100083, China.

Förderung

  • Deep Earth Probe and Mineral Resources Exploration National Science and Technology Major Project

Zitieren

APA

Zhang, X., Wang, Y., Zhang, Q., Qi, M., Zhang, J., Zhang, J., & Liu, X. (2026). A Zynq-Based Triaxial Vibration Sensing Station with GPS-Disciplined Timing. Sensors, 26(16), 5089. https://doi.org/10.3390/s26165089

Vancouver

Zhang X, Wang Y, Zhang Q, Qi M, Zhang J, Zhang J, et al. A Zynq-Based Triaxial Vibration Sensing Station with GPS-Disciplined Timing. Sensors. 2026;26(16):5089. doi:10.3390/s26165089

BibTeX
@article{Zhang2026,
  author = {Zhang, Xiyuan and Wang, Yongqing and Zhang, Qisheng and Qi, Mingwei and Zhang, Jinhang and Zhang, Jingwen and Liu, Xiaochang},
  title = {A Zynq-Based Triaxial Vibration Sensing Station with GPS-Disciplined Timing},
  journal = {Sensors},
  year = {2026},
  volume = {26},
  number = {16},
  pages = {5089},
  doi = {10.3390/s26165089}
}
Kostenlos starten →