EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Developing the NewAthena X-IFU Cryogenic AntiCoincidence Detector (CryoAC): From Microfabrication Process Standardization to Cryogenic Functional Verification Toward TRL5

Claudio Macculi iD, Matteo D'Andrea iD, Giacomo Gorla iD, Simone Lotti iD, Gabriele Minervini, Francesco Monastra iD, Luigi Piro, Lorenzo Ferrari Barusso iD, Edvige Celasco iD, Flavio Gatti, Daniele Grosso, Manuela Rigano und 12 weitere

Sensors · 06.08.2026 · 26 (15) · 4985

DOI: 10.3390/s26154985 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 06.08.2026. Verfasst von Claudio Macculi und 23 weiteren Autor:innen. Beteiligte Einrichtung: INAF/IAPS Roma, Via del Fosso del Cavaliere 100, 00133 Rome, Italy. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 18 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Agenzia Spaziale Italiana, esa, ASI.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The Cryogenic Anticoincidence (CryoAC) detector is a critical subsystem designed to reduce the particle background for the X-ray Integral Field Unit (X-IFU) instrument onboard the NewAthena space observatory, the next ESA X-ray Large mission. Advancing this technology to Technology Readiness Level 5 (TRL5) requires a unified validation spanning both cleanroom microfabrication repeatability and mK low temperature operational performance. This work presents the complete development cycle of the Demonstration Model 1.2 (DM 1.2), which is aimed at completing the TRL5 demonstration path featured by all the critical technologies operating simultaneously. First, single-process verification protocols were established for Iridium pulsed laser deposition, Reactive Ion Etching (RIE), and deep silicon trenching via the Bosch process. Second, three identical single-pixel prototypes were fabricated and subjected to mK characterization. Four-wire resistance measurement results confirmed a 2/3 production yield against strict design targets (TC ~100 mK). Finally, functional testing at a bath temperature of 50 mK using a VTT FAB4 SQUID readout demonstrated excellent performance, including a low-energy threshold of ~0.6 keV, a pixel power dissipation of 5.15 nW, and an energy resolution ΔEFWHM = 735 eV at 6 keV. These combined achievements successfully validate the entire manufacturing and operational baseline against all primary space mission requirements. This paper has to be considered as a review of the CryoAC technology path toward the TRL5 achievement; main findings will be reported and discussed. Details are relegated to other papers.

Schlagwörter

Stichwörter der Autor:innen

Athena missionCryoACSQUIDTransition Edge SensorsX-IFUcryogenic testingmicrofabricationpulsed laser deposition

Autor:innen und Institutionen

  • INAF/IAPS Roma, Via del Fosso del Cavaliere 100, 00133 Rome, Italy.
  • Physics Department, Sapienza University of Rome, Piazzale Aldo Moro 2, 00185 Rome, Italy.
  • INAF HQ, Viale del Parco Mellini 84, 00136 Roma, Italy.
  • INAF/OAR, Via Frascati 33, Monte Porzio Catone, 00040 Rome, Italy.
  • INAF/OAB, Via Brera 28, 20121 Milano, Italy.
  • Physics Department and INFN Genova, Università di Genova, Via Dodecaneso 33, 16146 Genova, Italy.

ORCID-Profile: Claudio Macculi, Matteo D'Andrea, Giacomo Gorla, Simone Lotti, Francesco Monastra, Lorenzo Ferrari Barusso, Edvige Celasco, Guido Torrioli, Mauro Fiorini, Chiara Grappasonni, Angela Volpe, Paolo Bastia

Förderung

  • Agenzia Spaziale Italiana
  • esa
  • ASI
  • ESA (European Space Agency) Core Technology Program (CTP) AREMBES

Zitieren

APA

Macculi, C., D'Andrea, M., Gorla, G., Lotti, S., Minervini, G., Monastra, F., Piro, L., Ferrari Barusso, L., Celasco, E., Gatti, F., Grosso, D., Rigano, M., Chiarello, F., Torrioli, G., Fiorini, M., Uslenghi, M., Brienza, D., Cavazzuti, E., Grappasonni, C., …, & Villa, F. (2026). Developing the NewAthena X-IFU Cryogenic AntiCoincidence Detector (CryoAC): From Microfabrication Process Standardization to Cryogenic Functional Verification Toward TRL5. Sensors, 26(15), 4985. https://doi.org/10.3390/s26154985

Vancouver

Macculi C, D'Andrea M, Gorla G, Lotti S, Minervini G, Monastra F, et al. Developing the NewAthena X-IFU Cryogenic AntiCoincidence Detector (CryoAC): From Microfabrication Process Standardization to Cryogenic Functional Verification Toward TRL5. Sensors. 2026;26(15):4985. doi:10.3390/s26154985

BibTeX
@article{Macculi2026,
  author = {Macculi, Claudio and D'Andrea, Matteo and Gorla, Giacomo and Lotti, Simone and Minervini, Gabriele and Monastra, Francesco and Piro, Luigi and Ferrari Barusso, Lorenzo and Celasco, Edvige and Gatti, Flavio and Grosso, Daniele and Rigano, Manuela and Chiarello, Fabio and Torrioli, Guido and Fiorini, Mauro and Uslenghi, Michela and Brienza, Daniele and Cavazzuti, Elisabetta and Grappasonni, Chiara and Puccetti, Simonetta and Volpe, Angela and Bastia, Paolo and Coimbra, Artur Cardoso and Villa, Francesco},
  title = {Developing the NewAthena X-IFU Cryogenic AntiCoincidence Detector (CryoAC): From Microfabrication Process Standardization to Cryogenic Functional Verification Toward TRL5},
  journal = {Sensors},
  year = {2026},
  volume = {26},
  number = {15},
  pages = {4985},
  doi = {10.3390/s26154985}
}
Kostenlos starten →