EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Rate-Dependent Hysteresis Modeling and Hybrid Inverse Compensation Control for Piezoelectric Actuators

Qiwei Guo, Zhiliang Yu iD, Jian Zhou

Sensors · 03.08.2026 · 26 (15) · 4906

DOI: 10.3390/s26154906 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 03.08.2026. Verfasst von Qiwei Guo und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Aeronautics and Astronautics, Fudan University, Shanghai 200437, China. Die Arbeit nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Piezoelectric ceramic actuators are widely used in precision positioning and sensor-integrated micro-motion systems, but their accuracy is limited by asymmetric, rate-dependent hysteresis and by residual disturbances that remain after feedforward linearization. This study develops a self-contained modeling and control framework that combines an explicit rising/falling branch polynomial model, frequency-dependent coefficient maps, direct inverse feedforward compensation, and disturbance-observer-based adaptive sliding-mode feedback. The actuator is represented as a multilayer piezoelectric stack coupled to an equivalent electrical-mechanical-sensing plant. A branch-state logic resolves the multivalued inverse mapping, and a numerical order-sensitivity study shows that the seventh-order model provides the lowest validation RMSE while avoiding the endpoint growth observed at higher orders. Laboratory measurements at 1, 5, 10, 20, 50, and 100 Hz, together with attenuated, triangular, random-amplitude, step, and 2 Hz sinusoidal tests, are used for validation. The proposed branch model reduces static maximum relative fitting error from 4.50–6.21% for the classical P-I model to 1.28–2.58%. Direct inverse compensation reduces linearity error from 8.56–13.88% to 0.53–1.024%, and the hybrid controller achieves a 1% settling time of 8.6 ms, a maximum tracking error of 0.0051 micrometers, and an RMSE of 0.0012 micrometers. The results demonstrate an embedded-oriented compromise between model accuracy, online computational simplicity, and robust closed-loop precision.

Schlagwörter

Stichwörter der Autor:innen

adaptive sliding-mode controldisturbance observerhysteresis modeli-ngpiezoelectric actuator

Autor:innen und Institutionen

  • Department of Aeronautics and Astronautics, Fudan University, Shanghai 200437, China.
  • Aerospace System Engineering Shanghai, Shanghai 201100, China.
  • National Key Laboratory of Aerospace Mechanism, Shanghai 201100, China.
  • State Key Laboratory for Strength and Vibration of Mechanical Structures, School of Aerospace Engineering, Xi'an Jiaotong University, Xi'an 710049, China.

ORCID-Profile: Zhiliang Yu

Zitieren

APA

Guo, Q., Yu, Z., & Zhou, J. (2026). Rate-Dependent Hysteresis Modeling and Hybrid Inverse Compensation Control for Piezoelectric Actuators. Sensors, 26(15), 4906. https://doi.org/10.3390/s26154906

Vancouver

Guo Q, Yu Z, Zhou J. Rate-Dependent Hysteresis Modeling and Hybrid Inverse Compensation Control for Piezoelectric Actuators. Sensors. 2026;26(15):4906. doi:10.3390/s26154906

BibTeX
@article{Guo2026,
  author = {Guo, Qiwei and Yu, Zhiliang and Zhou, Jian},
  title = {Rate-Dependent Hysteresis Modeling and Hybrid Inverse Compensation Control for Piezoelectric Actuators},
  journal = {Sensors},
  year = {2026},
  volume = {26},
  number = {15},
  pages = {4906},
  doi = {10.3390/s26154906}
}
Kostenlos starten →