Lightweight 2.5D SLAM with Dynamic Map Refinement and Height-Aware Encoding for Resource-Constrained Indoor Robots
Sensors · 27.07.2026 · 26 (15) · 4765
DOI: 10.3390/s26154765 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, online erschienen am 27.07.2026. Verfasst von Guitao Yu und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Automation Engineering, University of Electronic Science and Technology of China, Chengdu 611731, China. Die Arbeit nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ningbo Key R&D Program.
Abstract (Originalsprache)
Indoor mobile robots equipped with low-cost and sparse sensors often suffer from limited vertical perception and dynamic residual artifacts in the final map. This paper presents a lightweight 2.5D simultaneous localization and mapping (SLAM) framework using a single-line laser distance sensor (LDS), time-of-flight (ToF) sensing, wheel odometry, and an inertial measurement unit (IMU). In this work, 2.5D refers to a 2D grid map with discretized vertical occupancy bins for each grid cell, rather than a full continuous 3D reconstruction. The system integrates multi-sensor synchronization, motion correction, error-state Kalman filter (ESKF)-based state estimation, normal distributions transform (NDT) registration, and pose graph optimization to reconstruct a pose-consistent global map. Based on this map, an offline dynamic refinement module estimates temporal voxel support across keyframes, extracts low-support candidate regions, and applies geometric clustering and isolated-point filtering to suppress transient residual artifacts while preserving stable structures. A 24-bit RGB occupancy encoding is further proposed to store the discretized vertical occupancy state in a compact three-channel image format. The proposed framework emphasizes system-level deployment value by combining sparse multi-sensor mapping, conservative offline refinement, and compact height-aware map export on a low-cost indoor robot platform. Experiments on public datasets, embedded hardware, and self-collected indoor sequences evaluate odometry reference performance, resource usage, platform-specific 2.5D mapping, dynamic refinement, and height-aware encoding.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Automation Engineering, University of Electronic Science and Technology of China, Chengdu 611731, China.
- Healthy & Intelligent Kitchen Engineering Research Center of Zhejiang Province, Bin-Hai 6th Road, Ningbo 315336, China.
- Faculty of mechanical Engineering and Mechanics, Ningbo University, Ningbo 315211, China.
ORCID-Profile: Guitao Yu, Yuping Zhang, Dongtai Liang
Förderung
- Ningbo Key R&D Program
Zitieren
APA
Yu, G., Zhang, Y., Qi, Z., Yang, K., He, Y., & Liang, D. (2026). Lightweight 2.5D SLAM with Dynamic Map Refinement and Height-Aware Encoding for Resource-Constrained Indoor Robots. Sensors, 26(15), 4765. https://doi.org/10.3390/s26154765
Vancouver
Yu G, Zhang Y, Qi Z, Yang K, He Y, Liang D. Lightweight 2.5D SLAM with Dynamic Map Refinement and Height-Aware Encoding for Resource-Constrained Indoor Robots. Sensors. 2026;26(15):4765. doi:10.3390/s26154765
BibTeX
@article{Yu2026,
author = {Yu, Guitao and Zhang, Yuping and Qi, Zhiao and Yang, Kui and He, Yang and Liang, Dongtai},
title = {Lightweight 2.5D SLAM with Dynamic Map Refinement and Height-Aware Encoding for Resource-Constrained Indoor Robots},
journal = {Sensors},
year = {2026},
volume = {26},
number = {15},
pages = {4765},
doi = {10.3390/s26154765}
}
EUVIMED