A Standalone Capacitive Tactile Fingertip Module for Multi-Point Contact Sensing in Robotic Grasping
Sensors · 27.07.2026 · 26 (15) · 4756
DOI: 10.3390/s26154756 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, online erschienen am 27.07.2026. Verfasst von Suncheol Kwon und 3 weiteren Autor:innen. Beteiligte Einrichtung: Korea Institute of Industrial Technology, Sangnok-gu, Ansan-si 15588, Republic of Korea. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science and ICT.
Abstract (Originalsprache)
Tactile sensing can enhance robotic grasping by providing contact information unavailable from vision or control signals alone. However, implementing tactile sensing in robotic hands is often constrained by external wiring, data-acquisition hardware, power requirements, and limited fingertip space. This study presents a self-contained capacitive tactile fingertip module for adding wireless multi-point contact sensing to robotic grippers. The module integrates a 3 × 1 array of thin flexible capacitive sensors, a capacitance-to-digital converter, a Bluetooth-enabled microcontroller, and an onboard battery within a compact fingertip-shaped housing. It can be mounted in place of an existing fingertip and operates independently of the robotic hand controller. Individual sensors characterized before module integration responded near-linearly to normal compression up to 2.5 N, with an approximately 8% relative capacitance change at 2.5 N and R2 = 0.99, and were evaluated over 100 repeated compression cycles. In proof-of-concept grasping tests with an empty PET bottle, a water-filled PET bottle, and a water-filled aluminum tumbler, the assembled module produced distinguishable capacitance changes at the mid- and proximal-position sensors, providing relative information on contact location and local loading rather than calibrated force. These results demonstrate the feasibility of wireless tactile sensing in robotic grasping using a compact standalone fingertip module.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Korea Institute of Industrial Technology, Sangnok-gu, Ansan-si 15588, Republic of Korea.
- Human in Motion Robotics Asia Inc., Gangnam-gu, Seoul 06224, Republic of Korea.
ORCID-Profile: Suncheol Kwon, Dongwoo Nam, Wonseok Shin, Bummo Ahn
Förderung
- Ministry of Science and ICT
Zitieren
APA
Kwon, S., Nam, D., Shin, W., & Ahn, B. (2026). A Standalone Capacitive Tactile Fingertip Module for Multi-Point Contact Sensing in Robotic Grasping. Sensors, 26(15), 4756. https://doi.org/10.3390/s26154756
Vancouver
Kwon S, Nam D, Shin W, Ahn B. A Standalone Capacitive Tactile Fingertip Module for Multi-Point Contact Sensing in Robotic Grasping. Sensors. 2026;26(15):4756. doi:10.3390/s26154756
BibTeX
@article{Kwon2026,
author = {Kwon, Suncheol and Nam, Dongwoo and Shin, Wonseok and Ahn, Bummo},
title = {A Standalone Capacitive Tactile Fingertip Module for Multi-Point Contact Sensing in Robotic Grasping},
journal = {Sensors},
year = {2026},
volume = {26},
number = {15},
pages = {4756},
doi = {10.3390/s26154756}
}
EUVIMED